Wired Plus Minus - All in One (2021 Models)

Change Levels of Assist and Regeneration,

The Wired Plus Minus (WPM -AIO) controller is simple to install and operate with your Falco eBike systems. It allows you to adjust the assist level of your motor on the fly without any confusing console or software accessory. With the easy-to-read LED lights, you’ll always know your assist level. Three levels of assist are available, as well as three regeneration modes. To reach any level of assist, press the + or – buttons. 

Installation:

The Wired Plus Minus connects to the 6-pin port on the BLE module. Before connecting, make sure that the battery is in the “off” position.

In the high assist mode, the motor offers the same level of assistance as the standard Falco eBike system without the WPM-EVO controller. The high assist level can be used on inclines that require more motor assistance but will drain the battery faster. The low assist can be used on flats or in situations when a higher assist level is not necessary. The battery life is extended when using the low assist level.

Regenerative modes can be very useful in long descents. When in regenerative mode, the motor creates resistance, acting as a sort of drag brake while also charging the battery. There are three different levels of regenerative mode: low, medium, and high. Low offers some resistance, medium offers more, and high has the most resistance. 

Note: ZERO mode, pedal assist, or regen mode are available on this accessory.