Wired Console including Plus Minus
- Change Levels of Assist/Regen.
- ODO Meter and Speed Read Out (mph/kph).
- Set CRM.
- Know Battery Level.
- Change Mode: Turbo Mode, Cruise Mode, and Eco Mode.
- Monitor Battery Voltage
- Monitor Motor Temperature
- Reverse Feature
The Hxd wired console is very simple to install and operate with the Falco eBike System. It allows you to adjust the assist level of your motor on the fly. With an easy-to-read LCD, you’ll always know your speed, distance, assist/regen level, mode, and battery level. Five levels of assist and regeneration are available. To reach any level of assistance, press the + or – buttons to increment or decrease the levels.
Installation:
Mount the console and the plus-minus on the handlebar of your trike, bike, or tandem. Connect the wire with a male 6-pin connector to the female 6-pin connector of the motor. Connect the Wireless Plus/Minus Controller to the Wired Console through the 4-pin connector.
Picture the 60" coil of wire in the photo of the console