{"product_id":"mini-cockpit-t","title":"Cockpit Mini T","description":"\u003cp\u003eThis Cockpit Mini T plugs in and clamps on to the end of your handlebar, allowing you to mount accessories and more!\u003c\/p\u003e\n\u003cp\u003eThe cable hole is great for e-assist displays that mount on the handlebars!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4YFIGvMZbUA\" height=\"480\" width=\"854\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eBig thanks to Ja Yoe for the videos. Visit \u003ca rel=\"noopener noreferrer\" href=\"http:\/\/jayoe.com\/\" target=\"_blank\"\u003eJaYoe.com\u003c\/a\u003e to keep up with his travels. Note that the wrist rest shown attached to our Mini-T in Matt's video is an HP Velotechnik item.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. How does it work?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe vertical part of the T fits down inside the end of the handlebar. A clamp goes down over the end of the handlebar and holds them together.\u003c\/p\u003e\n\u003cp\u003e2. Will it fit in my handlebar?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAlmost certainly. Any handlebar that can take bar end shifters can take this mount.\u003c\/p\u003e\n\u003cp\u003e3. What can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAll sorts of things- phones, computers, GPSs, mirrors, horns... or leave it free and use it as a hand rest or assist grip. It's quite useful. We don't recommend you put things like brakes and shifters on it though, it's made for being a rest and for mounting accessories.\u003c\/p\u003e\n\u003cp\u003e4. Can I use it with my bar end shifters?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eNo, we have another mount for that, our Bar End Shifter Mounts. They use a special clamp with a tunnel for the bar end shifter cable. You can also use our Cockpit Mounts, they go almost anywhere and work with bar end shifters.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eCut off the end of the handlebar grip so 3\/8 inch (10mm) of bare handlebar end is showing. This is fairly easily done if you wrap masking tape around the grip and cut along the line using a sharp knife.\u003c\/p\u003e\n\u003cp\u003eInsert the short end of the T down into the handlebar. It needs to go in about 1.5 inches (38mm). Push the clamp down so it is seated on the top of the handlebar (sight through the hole in the clamp to see where the edge of the handlebar is). Align the T where you want it, and tighten both clamp bolts.\u003c\/p\u003e\n\u003cp\u003eYou can mount things inside the horizontal tube by removing the end caps.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits into any handlebar that can take bar end shifters (bars with 3\/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T.\u003c\/li\u003e\n\u003cli\u003eDiameter of the horizontal portion is 7\/8 inch (22.2mm), the same as a standard handlebar, so all kinds of things can be attached. We do not recommend that you attach controls like shifters and brakes, however.\u003c\/li\u003e\n\u003cli\u003eNote that if you have Bar End Shifters, the ends of your bars already have something in them. We have a different mount if so, our Bar End Shifter Mounts. They use a special clamp with a tunnel for the bar end shifter cable. You can also use our Cockpit Mounts, they go almost anywhere and work with bar end shifters.\u003c\/li\u003e\n\u003cli\u003e4 inches (100mm) wide and 3 inches (75mm) tall. Requires 1.5 inch (38mm) of insertion into the handlebar for a net height above the end of the handlebar of 1.5 inches (38mm). Requires 3\/8 inch (10mm) of clear handlebar end to clamp onto. Made from black powder coated aluminum.\u003c\/li\u003e\n\u003cli\u003eFits any bike or trike with 7\/8 inch outside diameter and 3\/4 inch inside diameter handlebars (almost all underseat handlebars are made this way).\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"3.75in with No Cable Hole","offer_id":49313961378036,"sku":"ACM240.1","price":64.0,"currency_code":"USD","in_stock":true},{"title":"5in with Cable Hole","offer_id":49313961410804,"sku":"ACM240.2","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Untitled-4_02c0e32d-541a-4edb-9882-15ae44da01e9.png?v=1788458184","url":"https:\/\/falcoedrive.com\/products\/mini-cockpit-t","provider":"Falco eMotors Inc.","version":"1.0","type":"link"}