{"title":"Battery Mounts","description":"\u003cp\u003eT-Cycle battery mounts for e-assist bikes and trikes — fully configurable, Catrike, ICE, and direct-attach mounts plus shelves, extenders, and plates. Pairs with Falco eDrive systems.\u003c\/p\u003e","products":[{"product_id":"fully-configurable-battery-mount","title":"Fully Configurable Battery Mount","description":"\u003cp\u003eElectric drives on bikes and trikes are great for transportation and for enabling anyone to get out and ride, but until now, most people have had to hodgepodge together a way to carry the battery. Batteries are big, dense and valuable, and you don't want to just stick them anywhere. A rear rack sometimes works, but then the wires have to be extended, the weight is up high, and you can't use the rack for anything else. Introducing T-Cycle's new and improved Battery Mount! An even better way to attach your valuable, heavy battery: centered, low down, and out of the way. You'll hardly know it's there! Height and angle can be adjusted to fit just about any bike or trike on the market. CNC machined mounting clamps precision made for all the most common frame sizes. This battery mount is the super sturdy, elegant battery solution that the recumbent world has been waiting for. Works on left, right, and even both sides if you want to run two batteries. Right side configurations usually require the optional extender to clear the chain.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What does this do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount allows you to mount a battery under the seat and close to the centerline of your bike or trike. This is usually the very best place to mount a battery, because it's low and centered for better stability. Mounting heavy things like batteries up high over the rear wheel often leads to handling issues. This mount was designed to solve that. We make different Battery Mounts specific to the ICE trikes. If you have an ICE rigid or rear suspended trike, we recommend the specific mounts because they are carefully designed to work with the fold (the battery winds up on top after the fold, where it doesn't interfere with anything). If you have an HP Scorpion trike, due to the complicated main tube, these mounts won't work- there's just no good place to attach. We are working on Scorpion battery mounts that attach where the HP racks do, but are reconfigurable for any Scorpion, on either the left or right side. Stay tuned.\u003c\/p\u003e\n\u003cp\u003e2. Where does it go?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt depends on the bike or trike, but on the main tube, generally just behind and under the seat. Whether it goes on the left or right side depends on the bike or trike. Most folders need the battery on the right side so it winds up on the outside after the fold. An optional extender moves things out past the chain on the right or out past other obstacles on the left. All the parts can be flipped and reversed and reconfigured to get a wide range of mounting positions on either side of your bike or trike.\u003c\/p\u003e\n\u003cp\u003e3. What kind of batteries can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAll sorts of them. The battery shelf is large and sturdy. We drill and tap it for some of the common batteries, like the BionX and NeoDrives that use standard bottle boss spacing. For other batteries, in shrink wrap or nylon housings, you can usually just strap them on or use zip ties. We make special, additional plates to mount unusual batteries like the BionX rear rack battery and the Falco flat batteries.\u003c\/p\u003e\n\u003cp\u003e4. What size do I need?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe machine clamps to exactly match the size of your main frame tube, so the size needs to be exact. When you tell us the make and model of your trike, we can pick the right clamps for you.\u003c\/p\u003e\n\u003cp\u003e5. Do I need the sideways extender?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe sideways extender moves the vertical plate and battery shelf out 2.5 inches (6.35cm). Smaller amounts of sideways positioning can be done with custom bushings. If you need to clear a chainstay or some other obstruction by positioning the battery further out sideways, you probably need the extender. If you have an unusual situation and might need custom bushings, let us know.\u003c\/p\u003e\n\u003cp\u003e6. What about unusual batteries?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe have an adapter plate for larger batteries with mounting holes specific for the BionX, Falco, and Shimano rear rack batteries. The adapter plate is also useful for supporting large brick type batteries. We also have a special mounting rail for the Shimano Steps downtube battery.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"854\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/EuCgTKE-psE\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eThe mount consists of a heavy duty clamp that attach to the frame, an angle adjustable vertical plate that attaches to the frame clamp, and a battery shelf that attaches to the vertical plate. The frame clamps are sized specifically to your trike. The vertical plate and battery shelf can be rotated to different angles depending on what is needed for your trike. The parts can be combined in different configurations, flipped over, reversed, and used on opposite sides. The combination of adjustments allows the battery shelf to be positioned at different angles and heights according to your needs.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFirst, hold the battery in the area where you would like it to go to get an idea of where the shelf, adapter plate, and frame clamp need to be.\u003c\/li\u003e\n\u003cli\u003eRemove the clamp arch, hold the clamp against the frame, and reinstall the arch.\u003c\/li\u003e\n\u003cli\u003eBe sure to route any cables over the clamp, so they don't get pinched.\u003c\/li\u003e\n\u003cli\u003eTighten the frame clamp, then adjust the angle of the vertical plate as needed.\u003c\/li\u003e\n\u003cli\u003eWhen the vertical plate is positioned, install the shelf at the angle that works best.\u003c\/li\u003e\n\u003cli\u003eAttach your battery to the shelf with bolts, zip ties, or straps, as needed. That's it!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame clamps are available in all common main tube sizes: 1.125, 1.25, 1.375, 1.5, 1.625, 1.75, and 2.0 inches; and 40, 50, 54, and 60mm; and the square tubing of Greenspeed Magnum, Anura, and GT20. We can often shim to other sizes, email for more information on that. Shims usually run $12-$15.\u003c\/li\u003e\n\u003cli\u003eThe frame clamps require a 5\/8 inch (16mm) area of straight, round, obstacle free main tube. Cables passing by is OK, but it's important there is nothing welded onto the frame right where the clamps might need to go. If you have any questions, you can email us a photo of your frame and we can determine what locations would work.\u003c\/li\u003e\n\u003cli\u003eThe optional extender moves the vertical plate and battery shelf out 2.5 inches (6.35cm). Smaller amounts of sideways positioning can be done with custom bushings.\u003c\/li\u003e\n\u003cli\u003eFor unusual situations, we have a dual battery mounting plate that attaches under the main tube. Contact us for details.\u003c\/li\u003e\n\u003cli\u003eMounts are machined from 6061-T6 aluminum and black anodized. Frame clamps are 5\/8 inch (16mm) wide. The frame clamping bolts are m6 stainless steel, so they are able to support batteries up to about 15 lbs (6.8Kg). Battery mounting holes are m5x0.8, threaded through 0.25 inches (6.35mm) mounting plate.\u003c\/li\u003e\n\u003cli\u003eThe battery Shelf is 5in x 2.5in (13cm x 7cm) and has 14 m5x0.8 threaded holes for attaching batteries or battery adapter plates. The holes are in 2 rows, one with bottle boss spacing and the other with the spacings used by common batteries.\u003c\/li\u003e\n\u003cli\u003eIf you let us know, we can provide bolts and spacers specific to the popular BionX down tube battery. If your battery uses standard bottle boss spacing, it will probably bolt right on. For other batteries, because there are so many different kinds out there, you may need to arrange the fixing of the battery to the shelf. There are extra holes on the battery shelf that are usually sufficient, and you are free to add to them as needed.\u003c\/li\u003e\n\u003cli\u003eThe optional extender moves the vertical plate and battery shelf out 2.5 inches (6.35cm). Smaller amounts of sideways positioning can be done with custom bushings.\u003c\/li\u003e\n\u003cli\u003eWe have a adapter plates for the Battery Shelf for longer\/larger batteries like the BionX, Falco, and Shimano rear rack batteries. We also have a special mounting rail for the Shimano STePS downtube battery.\u003c\/li\u003e\n\u003cli\u003eRecommended maximum battery weight is 15 lbs (6.8Kg). These mounts are very stout and can probably handle more, but due to the wide range of conditions out there, we rate them for 15lbs, which is actually a lot of battery.\u003c\/li\u003e\n\u003cli\u003eThe Frame Clamps are made in a variety of sizes for almost every round tube used on bikes and trikes, and the vertical Plate is highly adjustable, so it is usually possible to install this mount on nearly any trike as well as many bikes. The mount can go on the left or the right side, or both sides, depending on your needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.125\"","offer_id":49313626030324,"sku":"BAT342.1","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.375\"","offer_id":49313626063092,"sku":"BAT342.2","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.25\"","offer_id":49313626095860,"sku":"BAT342.3","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.5\"","offer_id":49313626128628,"sku":"BAT342.4","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 40mm","offer_id":49313626161396,"sku":"BAT342.5","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.625\"","offer_id":49313626194164,"sku":"BAT342.6","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.75\"","offer_id":49313626226932,"sku":"BAT342.7","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 1.8\"","offer_id":49313626259700,"sku":"BAT342.100","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 50mm","offer_id":49313626292468,"sku":"BAT342.8","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 2.0\"","offer_id":49313626325236,"sku":"BAT342.9","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 54mm","offer_id":49313626358004,"sku":"BAT342.10","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ 60mm","offer_id":49313626390772,"sku":"BAT342.11","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ Greenspeed Non-Magnum Rectangular Frame","offer_id":49313626423540,"sku":"BAT342.12","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ Greenspeed Magnum Rectangular Frame","offer_id":49313626456308,"sku":"BAT342.13","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ Bacchetta (Corsa, Strada, Giro)","offer_id":49313626489076,"sku":"BAT342.14","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ No Extender \/ TerraTrike Rover Square Frame","offer_id":49313626521844,"sku":"BAT342.15","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.125\"","offer_id":49313626554612,"sku":"BAT342.16","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.375\"","offer_id":49313626587380,"sku":"BAT342.17","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.25\"","offer_id":49313626620148,"sku":"BAT342.18","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.5\"","offer_id":49313626652916,"sku":"BAT342.19","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 40mm","offer_id":49313626685684,"sku":"BAT342.20","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.625\"","offer_id":49313626718452,"sku":"BAT342.21","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.75\"","offer_id":49313626751220,"sku":"BAT342.22","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 1.8\"","offer_id":49313626783988,"sku":"BAT342.101","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 50mm","offer_id":49313626816756,"sku":"BAT342.23","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 2.0\"","offer_id":49313626849524,"sku":"BAT342.24","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 54mm","offer_id":49313626882292,"sku":"BAT342.25","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ 60mm","offer_id":49313626915060,"sku":"BAT342.26","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ Greenspeed Non-Magnum Rectangular Frame","offer_id":49313626947828,"sku":"BAT342.27","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ Greenspeed Magnum Rectangular Frame","offer_id":49313626980596,"sku":"BAT342.28","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ Bacchetta (Corsa, Strada, Giro)","offer_id":49313627013364,"sku":"BAT342.29","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") \/ Add Extender \/ TerraTrike Rover Square Frame","offer_id":49313627046132,"sku":"BAT342.30","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.125\"","offer_id":49313627078900,"sku":"BAT342.31","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.375\"","offer_id":49313627111668,"sku":"BAT342.32","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.25\"","offer_id":49313627144436,"sku":"BAT342.33","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.5\"","offer_id":49313627177204,"sku":"BAT342.34","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 40mm","offer_id":49313627209972,"sku":"BAT342.35","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.625\"","offer_id":49313627242740,"sku":"BAT342.36","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.75\"","offer_id":49313627275508,"sku":"BAT342.37","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 1.8\"","offer_id":49313627308276,"sku":"BAT342.102","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 50mm","offer_id":49313627341044,"sku":"BAT342.38","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 2.0\"","offer_id":49313627373812,"sku":"BAT342.39","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 54mm","offer_id":49313627406580,"sku":"BAT342.40","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ 60mm","offer_id":49313627439348,"sku":"BAT342.41","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ Greenspeed Non-Magnum Rectangular Frame","offer_id":49313627472116,"sku":"BAT342.42","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ Greenspeed Magnum Rectangular Frame","offer_id":49313627504884,"sku":"BAT342.43","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ Bacchetta (Corsa, Strada, Giro)","offer_id":49313627537652,"sku":"BAT342.44","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ No Extender \/ TerraTrike Rover Square Frame","offer_id":49313627570420,"sku":"BAT342.45","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.125\"","offer_id":49313627603188,"sku":"BAT342.46","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.375\"","offer_id":49313627635956,"sku":"BAT342.47","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.25\"","offer_id":49313627668724,"sku":"BAT342.48","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.5\"","offer_id":49313627701492,"sku":"BAT342.49","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 40mm","offer_id":49313627734260,"sku":"BAT342.50","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.625\"","offer_id":49313627767028,"sku":"BAT342.51","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.75\"","offer_id":49313627799796,"sku":"BAT342.52","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 1.8\"","offer_id":49313627832564,"sku":"BAT342.103","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 50mm","offer_id":49313627865332,"sku":"BAT342.53","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 2.0\"","offer_id":49313627898100,"sku":"BAT342.54","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 54mm","offer_id":49313627930868,"sku":"BAT342.55","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ 60mm","offer_id":49313627963636,"sku":"BAT342.56","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ Greenspeed Non-Magnum Rectangular Frame","offer_id":49313627996404,"sku":"BAT342.57","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ Greenspeed Magnum Rectangular Frame","offer_id":49313628029172,"sku":"BAT342.58","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ Bacchetta (Corsa, Strada, Giro)","offer_id":49313628061940,"sku":"BAT342.59","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STEPS Adapter \/ Add Extender \/ TerraTrike Rover Square Frame","offer_id":49313628094708,"sku":"BAT342.60","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.125\"","offer_id":49313628127476,"sku":"BAT342.61","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.375\"","offer_id":49313628160244,"sku":"BAT342.62","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.25\"","offer_id":49313628193012,"sku":"BAT342.63","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.5\"","offer_id":49313628225780,"sku":"BAT342.64","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 40mm","offer_id":49313628258548,"sku":"BAT342.65","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.625\"","offer_id":49313628291316,"sku":"BAT342.66","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.75\"","offer_id":49313628324084,"sku":"BAT342.67","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 1.8\"","offer_id":49313628356852,"sku":"BAT342.104","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 50mm","offer_id":49313628389620,"sku":"BAT342.68","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 2.0\"","offer_id":49313628422388,"sku":"BAT342.69","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 54mm","offer_id":49313628455156,"sku":"BAT342.70","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ 60mm","offer_id":49313628487924,"sku":"BAT342.71","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ Greenspeed Non-Magnum Rectangular Frame","offer_id":49313628520692,"sku":"BAT342.72","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ Greenspeed Magnum Rectangular Frame","offer_id":49313628553460,"sku":"BAT342.73","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ Bacchetta (Corsa, Strada, Giro)","offer_id":49313628586228,"sku":"BAT342.74","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ No Extender \/ TerraTrike Rover Square Frame","offer_id":49313628618996,"sku":"BAT342.75","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.125\"","offer_id":49313628651764,"sku":"BAT342.76","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.375\"","offer_id":49313628684532,"sku":"BAT342.77","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.25\"","offer_id":49313628717300,"sku":"BAT342.78","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.5\"","offer_id":49313628750068,"sku":"BAT342.79","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 40mm","offer_id":49313628782836,"sku":"BAT342.80","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.625\"","offer_id":49313628815604,"sku":"BAT342.81","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.75\"","offer_id":49313628848372,"sku":"BAT342.82","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 1.8\"","offer_id":49313628881140,"sku":"BAT342.105","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 50mm","offer_id":49313628913908,"sku":"BAT342.83","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 2.0\"","offer_id":49313628946676,"sku":"BAT342.84","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 54mm","offer_id":49313628979444,"sku":"BAT342.85","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ 60mm","offer_id":49313629012212,"sku":"BAT342.86","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ Greenspeed Non-Magnum Rectangular Frame","offer_id":49313629044980,"sku":"BAT342.87","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ Greenspeed Magnum Rectangular Frame","offer_id":49313629077748,"sku":"BAT342.88","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ Bacchetta (Corsa, Strada, Giro)","offer_id":49313629110516,"sku":"BAT342.89","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (4\" x 12\") \/ Add Extender \/ TerraTrike Rover Square Frame","offer_id":49313629143284,"sku":"BAT342.90","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Fully-Configurable-Ferris-Wheel_227bf206-1533-4ef0-b4b0-ec3da13bffa7.gif?v=1788457870"},{"product_id":"ice-configured-battery-mount-rigid-rear","title":"ICE Configured Battery Mount - Rigid Rear","description":"\u003cp\u003eThis T-Cycle made Battery Mount for ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. Choosing the BionX or Neodrives option allows us to send along spacers specifically created for the respective system. Other configurations receive more generic spacers and\/or zip ties, based on your particular battery.\u003c\/p\u003e\n\u003cp\u003eBatteries are dense and difficult to carry. This mount lets you attach your BionX, Neodrives, or other battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached!\u003c\/p\u003e\n\u003cp\u003eDown low is important for handling and stability—you don't want something as heavy as a battery on top of a rear rack. And out the way means you still get full use of your rear rack if you have one.\u003c\/p\u003e\n\u003cp\u003eIf you have been struggling with how to carry your battery, this elegant, simple solution is what you've been looking for!\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. Why do I need a special battery mount?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eBatteries are heavy, so it's best to carry them down low and in a place that won't affect handling. A rear rack or seatback bag are not good solutions- the battery is up higher than it should be, and it tends to be awkward when it's time to fold or transport your trike. This mount is designed to have the rigidity to securely hold your battery, while not in any way interfering with your seat, suspension, rear rack, or the ability to fold your trike. An electric drive is a big investment, and how to properly hold the battery is an important consideration. It was not easy to design this mount, there are not a lot of places a battery can go where everything works.\u003c\/p\u003e\n\u003cp\u003e2. How does it attach?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt attaches with a special mount to the fender strut tube on the rigid rear section, along with a stabilizing attachment up at the rack mount. The strut tube is very strong, and is a great place to attach something heavy like a battery. Adjustable to work with or without a rear rack in place.\u003c\/p\u003e\n\u003cp\u003e3. Can I still fold my trike?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, the battery winds up on top, just ahead of the rear hinge.\u003c\/p\u003e\n\u003cp\u003e4. Is it strong enough?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eMy battery is pretty heavy. Yes, the attachment mechanism and the mount itself are designed to carry batteries weighing up to 20 lbs (9kg).\u003c\/p\u003e\n\u003cp\u003e5. Does this work with both 20 and 26 inch rigid rear sections?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, there are two slots at the top of the vertical plate. One lines up with the rack mount on a 20 inch rear section, and the other slot lines up with the rack mount on the 26 inch rear section.\u003c\/p\u003e\n\u003cp\u003e6. Is ICE OK with this?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount is the result of extensive thought and prototyping involving ICE and Icletta, our EU distributor and the ICE distributor for Germany, Austria, and Switzerland. This mount has been in use in Europe for 2+ years, and now ICE uses them for their electrified rigid rear trikes.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eAttachment is straightforward and only takes a few minutes. The first step is to attach the main support arm to the fender strut. Delrin shims are provided for clearance since the welds come in close.\u003c\/p\u003e\n\u003cp\u003eThe main support arm attaches on the right (drivetrain) side of the trike underneath the power side chain tube.\u003c\/p\u003e\n\u003cp\u003eRotate the plate so the slot at the top lines up with the rack attachment point (there are two slots, one for 20 inch wheel rear triangles and one for 26 inch). If you have a rear rack, slide the vertical plate out so it lines up with the outside of the rack.\u003c\/p\u003e\n\u003cp\u003eAttach your battery. The mount comes drilled and tapped for Ansmann, BionX, and standard bottle boss batteries, and you can easily adapt other battery systems. Batteries designed to be strapped to a rack can be strapped to the shelf and\/or the vertical plate. The shelf and plate are designed to be drilled for additional mounting holes if needed. We also make an adapter plate for flat pack batteries and the Steps batteries.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e We originally developed this mount at the request of Icletta, our EU distributor. They are also thte ICE distributor for Germany, Austria, and Switzerland. Electric bikes and trikes are very big in Europe, and Icletta wanted a first class way to hold the battery. We consulted with ICE and Icletta as the development progressed.\u003c\/li\u003e\n\u003cli\u003eThe design goals for this mount were:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1. Allow the battery to be firmly held down as low as possible, so handling would not be affected.\u003c\/li\u003e\n\u003cli\u003e2. Position the battery and mount so they would not interfere with the fold in any way, and \u003c\/li\u003e\n\u003cli\u003e3. Allow the attachment of a wide range of battery types, with specific versions for the BionX, Ansmann, and Falco batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eWe are quite happy to say we succeeded very well on all counts. The battery is in a great place, it's under the seat and tucked away, and doesn't interfere with seatback bags or things on the rear rack. Folding is unaffected, and the battery winds up in a convenient spot after the fold. And, the design very simply provides for mounting all kinds of batteries, including very heavy ones.\u003c\/li\u003e\n\u003cli\u003eAll parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel.\u003c\/li\u003e\n\u003cli\u003eThe primary attachment is to the fender strut tube. A pair of clamps attach another sideways tube. A mounting plate goes up from outside the chain up to the rear rack attachment point. A shelf attaches the the bottom of the mounting plate to hold the battery. The shelf is drilled and tapped to accept bottle boss batteries and the BionX downtube mounting rail, but other batteries can be easily mounted. The Ansmann battery system is designed to attach to a vertical plate, so it doesn't need the shelf at all. Batteries in nylon packs can be strapped to the shelf and to the vertical plate.\u003c\/li\u003e\n\u003cli\u003eWe also make adapter plates for the BionX Type R (rear rack) and Falco batteries, since they have such different mountings.\u003c\/li\u003e\n\u003cli\u003eThe battery Shelf is 6 x 3.25in (15.25 x 8.25cm) and has 15 M5x0.8 threaded holes for attaching batteries or battery adapter plates. 13 of the holes are in 2 rows with bottle boss spacing used by many batteries.\u003c\/li\u003e\n\u003cli\u003eMounting hardware are provided for the rear rack attachment point for trikes with and without a rear rack.\u003c\/li\u003e\n\u003cli\u003eBoth the vertical plate and the shelf are made from 1\/4 inch (6.35mm) thick aluminum. This means it is both very sturdy and easily drilled to modify needed for your particular battery system.\u003c\/li\u003e\n\u003cli\u003eCompatible with all rigid ICE trikes from 2010 onwards. We make a different kit for the suspended trikes. Earlier rigid trikes may work, but we haven't had a chance to test them. This mount is very specific to the ICE trikes, so it won't work with other brands. We have a Universal Battery Mount that works on nearly all trikes, but doesn't work with the fold on an ICE trike like this ICE specific mount does.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries)","offer_id":44584906260724,"sku":"BAT322.1","price":205.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery Monorail","offer_id":44584906326260,"sku":"BAT322.2","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries)","offer_id":44584906391796,"sku":"BAT322.3","price":262.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/02635_ol_f9e802ab-9c30-46a8-a60c-abc8d3554b20.jpg?v=1788457873"},{"product_id":"frame-clamp","title":"Frame Clamp","description":"The heaviest duty clamp we offer!  It's the clamp that holds the \u003cstrong\u003eBattery Mounts\u003c\/strong\u003e, the \u003cstrong\u003eSPRING Mini Fairing Mount\u003c\/strong\u003e and the \u003cstrong\u003eWINTR Fairing Mount\u003c\/strong\u003e in place!  Sporting twin 6mm bolts, this 5\/8\" thick beast stays where you put it and holds what you need it to hold. Made in an ever-growing list of sizes, there's a clamp for nearly every tube on the market!\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1.125\" \/ For use with Battery Mount","offer_id":49313622720756,"sku":"BAT366.17","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.125\" \/ For use with SPRING Fairing","offer_id":49313622753524,"sku":"BAT366.1","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.125\" \/ For use with WINTR Fairing","offer_id":49313622786292,"sku":"BAT366.42","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ For use with Battery Mount","offer_id":49313622819060,"sku":"BAT366.19","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ For use with SPRING Fairing","offer_id":49313622851828,"sku":"BAT366.3","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ For use with WINTR Fairing","offer_id":49313622884596,"sku":"BAT366.45","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.375\" \/ For use with Battery Mount","offer_id":49313622917364,"sku":"BAT366.18","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.375\" \/ For use with SPRING Fairing","offer_id":49313622950132,"sku":"BAT366.2","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.375\" \/ For use with WINTR Fairing","offer_id":49313622982900,"sku":"BAT366.44","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ For use with Battery Mount","offer_id":49313623015668,"sku":"BAT366.20","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ For use with SPRING Fairing","offer_id":49313623048436,"sku":"BAT366.4","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ For use with WINTR Fairing","offer_id":49313623081204,"sku":"BAT366.46","price":50.0,"currency_code":"USD","in_stock":true},{"title":"40mm \/ For use with Battery Mount","offer_id":49313623113972,"sku":"BAT366.21","price":50.0,"currency_code":"USD","in_stock":true},{"title":"40mm \/ For use with SPRING Fairing","offer_id":49313623146740,"sku":"BAT366.5","price":50.0,"currency_code":"USD","in_stock":true},{"title":"40mm \/ For use with WINTR Fairing","offer_id":49313623179508,"sku":"BAT366.47","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.625\" \/ For use with Battery Mount","offer_id":49313623212276,"sku":"BAT366.22","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.625\" \/ For use with SPRING Fairing","offer_id":49313623245044,"sku":"BAT366.6","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.625\" \/ For use with WINTR Fairing","offer_id":49313623277812,"sku":"BAT366.48","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.75\" \/ For use with Battery Mount","offer_id":49313623310580,"sku":"BAT366.23","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.75\" \/ For use with SPRING Fairing","offer_id":49313623343348,"sku":"BAT366.7","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.75\" \/ For use with WINTR Fairing","offer_id":49313623376116,"sku":"BAT366.49","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.8\" \/ For use with Battery Mount","offer_id":49313623408884,"sku":"BAT366.32","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.8\" \/ For use with SPRING Fairing","offer_id":49313623441652,"sku":"BAT366.16","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1.8\" \/ For use with WINTR Fairing","offer_id":49313623474420,"sku":"BAT366.43","price":50.0,"currency_code":"USD","in_stock":true},{"title":"50mm \/ For use with Battery Mount","offer_id":49313623507188,"sku":"BAT366.24","price":50.0,"currency_code":"USD","in_stock":true},{"title":"50mm \/ For use with SPRING Fairing","offer_id":49313623539956,"sku":"BAT366.8","price":50.0,"currency_code":"USD","in_stock":true},{"title":"50mm \/ For use with WINTR Fairing","offer_id":49313623572724,"sku":"BAT366.50","price":50.0,"currency_code":"USD","in_stock":true},{"title":"2.0\" \/ For use with Battery Mount","offer_id":49313623605492,"sku":"BAT366.25","price":50.0,"currency_code":"USD","in_stock":true},{"title":"2.0\" \/ For use with SPRING Fairing","offer_id":49313623638260,"sku":"BAT366.9","price":50.0,"currency_code":"USD","in_stock":true},{"title":"2.0\" \/ For use with WINTR Fairing","offer_id":49313623671028,"sku":"BAT366.51","price":50.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ For use with Battery Mount","offer_id":49313623703796,"sku":"BAT366.26","price":50.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ For use with SPRING Fairing","offer_id":49313623736564,"sku":"BAT366.10","price":50.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ For use with WINTR Fairing","offer_id":49313623769332,"sku":"BAT366.35","price":50.0,"currency_code":"USD","in_stock":true},{"title":"60mm \/ For use with Battery Mount","offer_id":49313623802100,"sku":"BAT366.27","price":50.0,"currency_code":"USD","in_stock":true},{"title":"60mm \/ For use with SPRING Fairing","offer_id":49313623834868,"sku":"BAT366.11","price":50.0,"currency_code":"USD","in_stock":true},{"title":"60mm \/ For use with WINTR Fairing","offer_id":49313623867636,"sku":"BAT366.36","price":50.0,"currency_code":"USD","in_stock":true},{"title":"TerraTrike Rover Square Main Frame Tubing \/ For use with Battery Mount","offer_id":49313623900404,"sku":"BAT366.31","price":50.0,"currency_code":"USD","in_stock":true},{"title":"TerraTrike Rover Square Boom Tubing \/ For use with SPRING Fairing","offer_id":49313623933172,"sku":"BAT366.15","price":50.0,"currency_code":"USD","in_stock":true},{"title":"TerraTrike Rover Square Boom Tubing \/ For use with WINTR Fairing","offer_id":49313623965940,"sku":"BAT366.40","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Bacchetta (Corsa, Strada, Giro) \/ For use with Battery Mount","offer_id":49313623998708,"sku":"BAT366.30","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Greenspeed Anura\/GT20\/X7 Square Main Frame Tubing \/ For use with Battery Mount","offer_id":49313624031476,"sku":"BAT366.28","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Greenspeed Anura\/GT20\/X7 Square Boom Tubing \/ For use with SPRING Fairing","offer_id":49313624064244,"sku":"BAT366.12","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Greenspeed Anura\/GT20\/X7 Square Boom Tubing \/ For use with WINTR Fairing","offer_id":49313624097012,"sku":"BAT366.37","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Greenspeed Magnum Square Main Frame Tubing \/ For use with Battery Mount","offer_id":49313624129780,"sku":"BAT366.29","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Greenspeed Magnum Square Boom Tubing \/ For use with SPRING Fairing","offer_id":49313624162548,"sku":"BAT366.13","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Greenspeed Magnum Square Boom Tubing \/ For use with WINTR Fairing","offer_id":49313624195316,"sku":"BAT366.38","price":50.0,"currency_code":"USD","in_stock":true},{"title":"AnthroTech Boom \/ For use with SPRING Fairing","offer_id":49313624228084,"sku":"BAT366.33","price":50.0,"currency_code":"USD","in_stock":true},{"title":"AnthroTech Boom \/ For use with WINTR Fairing","offer_id":49313624260852,"sku":"BAT366.41","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Frame_Clamps.gif?v=1788457868"},{"product_id":"twin-tube-battery-mount","title":"Twin Tube Battery Mount","description":"\u003cp\u003eElectric Assist is a great way to make tandeming way more fun. Hill climbing is a breeze and even really long rides are within range. How to carry the battery though? This mount solves that. It puts the battery right where you'd like it, down low and out of the way. It doesn't compete for space with anything else, and your bike's handling is unaffected. Sweet! While we designed this for the Screamer, we are aware there are other twin bottom tube bikes out there this versatile mount will probably fit. We just haven't had time to test them yet.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. Where does this go?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eOn a Screamer, this mount is designed to go from just behind the idler mount to about 8 inches (20cm) ahead. A cutout in the plate wraps around the Screamer idler mount. But, since the plate has adjustment slots, it can be used other places.\u003c\/p\u003e\n\u003cp\u003e2. How does it attach?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe plate attaches via six modified Cateye brand clamps. We use Cateye clamps for all sorts of things, and six is plenty to keep your battery super secure. Cateye clamps are great because they work really well, are super strong, and are available in a nice range of sizes.\u003c\/p\u003e\n\u003cp\u003e3. Will my battery fit on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAlmost certainly. If it's any sort of regular downtube type battery, yes. The top of the plate is generously sized and has lots of 5mm mounting holes, so it will bolt right on. If you have a brick type battery or are using a case of some kind, you'll be able to attach it without much trouble.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eLay the plate on top of the twin bottom tubes where you think the battery should go. On a Screamer, this is usually right near the twin idler mount.\u003c\/li\u003e\n\u003cli\u003eCheck that the on edge of each tube is within reach of the adjustment slots. As long as the edge of the tube is within a slot or no more than about 3\/16 inch (5mm) beyond the end of a slot, the tube is within reach.\u003c\/li\u003e\n\u003cli\u003eSnap the Cateye clamps around the tubes so the aluminum bushings pressed into the clamps are facing up where the slots in the plate are. Make sure to slip the clamps under any cables. Line the clamps up with the slots in the plate, and start the bolts through the plate into the clamps.\u003c\/li\u003e\n\u003cli\u003eWhen the bolts are all started, slide the plate around to straighten it up and get it into final position. Tighten all the clamps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSlots in the plate allow for forward\/back and side to side adjustment as well has allowing use on bikes with different tube spacings and angles.\u003c\/li\u003e\n\u003cli\u003e25 mounting holes, in 3 rows, make attaching your battery easy. All are threaded m5, the standard battery mounting size.\u003c\/li\u003e\n\u003cli\u003eTwo battery standoffs with m5 flat head mounting bolts are provided. This is the most common downtube battery mounting arrangement.\u003c\/li\u003e\n\u003cli\u003ePlate is made from black anodized 6061T6 Aluminum. Overall plate size is 8\" x 3\" (20 x 7.5cm). 25 m5 threaded battery mounting holes in 3 rows. Holes are multiples of the standard bottle boss spacing, so downtube batteries will bolt right on in your choice of places.\u003c\/li\u003e\n\u003cli\u003eFits all known RANS Screamer models. The mount is made with adjustment slots, so it will work on additional twin bottom tube bikes as well, we just haven't had the time to do the testing. We'll try to keep this entry up to date, but call or email us if you have any questions about fit on your bike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"RANS Screamer (0.75in)","offer_id":44585655075060,"sku":"BAT344.1","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Easy Racers Tour Easy (0.875in)","offer_id":44585655140596,"sku":"BAT344.2","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/IMG_0892.jpg?v=1788458057"},{"product_id":"direct-attach-battery-mount-for-some-bikes-trikes","title":"Direct Attach Battery Mount (For Some Bikes \u0026 Trikes)","description":"\u003cp\u003eElectric drives on bikes and trikes are great for transportation and for enabling anyone to get out and ride, but until now, most people have had to hodgepodge together a way to carry the battery. Batteries are big, dense and valuable, and you don't want to just stick them anywhere. A rear rack sometimes works, but then the wires have to be extended, the weight is up high, and you can't use the rack for anything else. Introducing T-Cycle's Direct Attach Battery Mount, for those situations where a simple mount will do.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What does this do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount allows you to attach a battery right next to a tube. It's that simple.\u003c\/p\u003e\n\u003cp\u003e2. Where does it go?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt depends on the bike or trike, but on the main tube, generally on the boom, or just behind and under the seat, or on a chainstay. It very much depends on the bike or trike and the battery you want to mount. We make other Battery Mounts that are much more versatile, this one is the simple one for the cases when that works.\u003c\/p\u003e\n\u003cp\u003e3. What kind of batteries can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eMost commonly available batteries. The battery shelf is drilled and tapped for the common batteries, like the Lunacycles, Shark, Hailong, Falco, etc.  that use standard bottle boss spacing, as well as holes for NeoDrive and GoSwiss.\u003c\/p\u003e\n\u003cp\u003e4. What size do I need?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe machine clamps to exactly match the size of your main frame tube, so the size needs to be exact. When you tell us the make and model of your trike, we can pick the right clamps for you.\u003c\/p\u003e\n\u003cp\u003e5. Can I use a sideways extender?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe don't have sideways extender for this mount. Small amounts of sideways positioning can be done with custom spacers. If you need to clear a chainstay or some other obstruction by positioning the battery further out sideways, you probably need our Fully Configurable Mount. It can go all sorts of places.\u003c\/p\u003e\n\u003cp\u003e6. What about unusual batteries?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount is designed to be simple and doesn't support flat batteries like the BionX, Falco, and Shimano rear rack batteries, or the Shimano Steps batteries. Again, our Fully Configurable can do all of those.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eThe mount consists of a heavy duty clamp that attaches to the frame, and a battery shelf that attaches to the clamp. The frame clamps are sized specifically to your trike. The plate can be attached in 3 different positions on the clamp depending on what is needed for your bike or trike. The clamp can be rotated around the frame and the plate can be flipped end to end.  The combination of adjustments is limited compared to our Fully Configurable mount, but if you have the room for a battery along your frame, this mount can hold it there.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFirst, hold the battery in the area where you would like it to go to get an idea of where the shelf and frame clamp need to be.\u003c\/li\u003e\n\u003cli\u003eRemove the clamp arch, hold the clamp against the frame, and reinstall the arch.\u003c\/li\u003e\n\u003cli\u003eBe sure to route any cables over the clamp, so they don't get pinched.\u003c\/li\u003e\n\u003cli\u003eTighten the frame clamp, then attach the plate as needed.\u003c\/li\u003e\n\u003cli\u003eAttach your battery to the shelf with 5mm bolts (the bolts needed should come with the battery). That's it!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame clamps are available in all common main tube sizes: 1.125, 1.25, 1.375, 1.5, 1.625, 1.75, and 2.0 inches; and 40, 50, 54, and 60mm; and the square tubing of Greenspeed Magnum, Anura, and GT20. We can often shim to other sizes, email for more information on that. Shims usually run $12-$15.\u003c\/li\u003e\n\u003cli\u003eThe frame clamps require a 5\/8 inch (16mm) area of straight, round, obstacle free main tube. Cables passing by is OK, but it's important there is nothing welded onto the frame right where the clamps might need to go. If you have any questions, you can email us a photo of your frame and we can determine what locations would work.\u003c\/li\u003e\n\u003cli\u003eFor unusual situations, we have a dual battery mounting plate that attaches under the main tube. Contact us for details.\u003c\/li\u003e\n\u003cli\u003eMounts are machined from 6061-T6 aluminum and black anodized. Frame clamps are 5\/8 inch (16mm) wide. The frame clamping bolts are m6 stainless steel, so they are able to support batteries up to about 15 lbs (6.8Kg). Battery mounting holes are m5x0.8, threaded through 0.25 inches (6.35mm) mounting plate.\u003c\/li\u003e\n\u003cli\u003eThe battery Shelf is 4.9in x 2.9in (12,6cm x 7,5cm) and has 18 m5x0.8 threaded holes for attaching batteries or battery adapter plates. The holes are in 2 rows, plus a square pattern.\u003c\/li\u003e\n\u003cli\u003eRecommended maximum battery weight is 15 lbs (6.8Kg). These mounts are very stout and can probably handle more, but due to the wide range of conditions out there, we rate them for 15lbs, which is actually a lot of battery.\u003c\/li\u003e\n\u003cli\u003eThe Frame Clamps are made in a variety of sizes for almost every tube used on recumbent bikes and trikes, so it is usually possible to install this mount on many trikes as well as some bikes. The mount can go on the top, bottom left, or right side, or both sides, depending on your needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1.125in","offer_id":49313635827956,"sku":"BAT321.1","price":88.0,"currency_code":"USD","in_stock":true},{"title":"1.375in","offer_id":49313635860724,"sku":"BAT321.2","price":88.0,"currency_code":"USD","in_stock":true},{"title":"1.25in","offer_id":49313635893492,"sku":"BAT321.3","price":88.0,"currency_code":"USD","in_stock":true},{"title":"1.5in","offer_id":49313635926260,"sku":"BAT321.4","price":88.0,"currency_code":"USD","in_stock":true},{"title":"40mm","offer_id":44585769271540,"sku":"BAT321.5","price":88.0,"currency_code":"USD","in_stock":true},{"title":"1.625in","offer_id":49313635959028,"sku":"BAT321.6","price":88.0,"currency_code":"USD","in_stock":true},{"title":"1.75in","offer_id":49313635991796,"sku":"BAT321.7","price":88.0,"currency_code":"USD","in_stock":true},{"title":"1.8in","offer_id":49313636024564,"sku":"BAT321.16","price":88.0,"currency_code":"USD","in_stock":true},{"title":"50mm","offer_id":44585769402612,"sku":"BAT321.8","price":88.0,"currency_code":"USD","in_stock":true},{"title":"2.0in","offer_id":49313636057332,"sku":"BAT321.9","price":88.0,"currency_code":"USD","in_stock":true},{"title":"54mm","offer_id":44585769468148,"sku":"BAT321.10","price":88.0,"currency_code":"USD","in_stock":true},{"title":"60mm","offer_id":44585769500916,"sku":"BAT321.11","price":88.0,"currency_code":"USD","in_stock":true},{"title":"TerraTrike Rover Square Frame Tubing","offer_id":44585769533684,"sku":"BAT321.15","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/20200810_142120_ffba57ee-811c-4776-bf2f-b2f6c0806c3a.jpg?v=1788457873"},{"product_id":"double-wide-direct-attach-battery-mount-for-some-bikes-trikes","title":"Double Wide Direct Attach Battery Mount (For Some Bikes \u0026 Trikes)","description":"\u003cp\u003eIf you need to carry two batteries, and you have the right place to attach this on your bike or trike, this Double Wide Direct Attach Battery Mount is the way to go.\u003c\/p\u003e\n\u003cp\u003eElectric drives on bikes and trikes are great for transportation and for enabling anyone to get out and ride, but until now, most people have had to hodgepodge together a way to carry the battery. Batteries are big, dense and valuable, and you don't want to just stick them anywhere. Carrying two is often difficult. Introducing T-Cycle's Double Wide Direct Attach Battery Mount, for those situations where a simple double wide mount will do.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What does this do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount allows you to attach two batteries on both sides of a main tube. It's that simple.\u003c\/p\u003e\n\u003cp\u003e2. Where does it go?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt depends on the bike or trike, but usually on the main tube just behind and under the seat. You need room for the batteries and about 2.5in of straight tube to clamp to. It very much depends on the bike or trike and the batteries you want to mount. We make other Battery Mounts that are much more versatile, this one is a simple solution for two batteries for the cases when that works.\u003c\/p\u003e\n\u003cp\u003e3. What kind of batteries can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eMost commonly available batteries. The battery shelf is drilled and tapped for the common batteries, like the Lunacycles, Shark, Hailong, Falco, etc.  that use standard bottle boss spacing. There are six pairs of staggered holes on each side of the plate.\u003c\/p\u003e\n\u003cp\u003e4. What size do I need?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe machine clamps to exactly match the size of your main frame tube, so the size needs to be exact. When you tell us the make and model of your trike, we can pick the right clamps for you.\u003c\/p\u003e\n\u003cp\u003e5. What is the standoff distance of the plate from the tube?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor monotube applications, we provide 33mm (1.32in) spacers to either lift the plate above the tube or to hang the plate below the tube. Most people hang the plate below the tube to get more clearance under the seat. Chain clearance is usually better that way too.\u003c\/p\u003e\n\u003cp\u003e6. What about unusual batteries?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount is designed to be simple and doesn't support flat rear rack style batteries like the BionX, Falco, and Shimano rear rack batteries, or the Shimano Steps batteries. Again, our Fully Configurable can do all of those.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eThe mount consists of a two heavy duty clamps that attach to the frame, and a battery shelf that attaches to the clamps. The frame clamps are sized specifically to your trike. The plate can be attached in 3 different positions on the clamp depending on what is needed for your bike or trike. The clamp can be rotated around the frame and the plate can be flipped end to end.  The combination of adjustments is limited compared to our Fully Configurable mount, but if you have the room for a battery along your frame, this mount can hold it there.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFirst, hold the batteries in the area where you would like it to go to get an idea of where the shelf and frame clamp need to be.\u003c\/li\u003e\n\u003cli\u003eRemove the clamp arch, hold the clamp against the frame, and reinstall the arch.\u003c\/li\u003e\n\u003cli\u003eBe sure to route any cables over the clamps, so they don't get pinched.\u003c\/li\u003e\n\u003cli\u003eAttach the plate as needed.\u003c\/li\u003e\n\u003cli\u003eOnce the plate is attached and aligning the clamps, tighten the clamps.\u003c\/li\u003e\n\u003cli\u003eAttach your battery to the shelf with 5mm bolts (the bolts needed should come with the battery). That's it!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame clamps are available in all common round main tube sizes.\u003c\/li\u003e\n\u003cli\u003eThe frame clamps require a 2.5 inches (63mm) of straight, round, obstacle free main tube. Cables passing by is okay, but it's important there is nothing welded onto the frame right where the clamps might need to go. If you have any questions, you can email us a photo of your frame and we can determine what locations would work.\u003c\/li\u003e\n\u003cli\u003eMounts are machined from 6061-T6 aluminum and black anodized. Frame clamps are 5\/8 inch (16mm) wide. The frame clamping bolts are M6 stainless steel, so they are able to support batteries up to about 15 lbs (6.8Kg). Battery mounting holes are M5x0.8, threaded through 0.25 inches (6.35mm) mounting plate.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe battery Shelf is 4.0in x 11.8in (10cm x 30cm) and has 24 M5x0.8 threaded holes for attaching batteries. The holes are in 6 rows, 3 on each side.\u003c\/li\u003e\n\u003cli\u003eRecommended maximum battery weight is 15 lbs (6.8Kg). These mounts are very stout and can probably handle more, but due to the wide range of conditions out there, we rate them for 15lbs, which is actually a lot of battery.\u003c\/li\u003e\n\u003cli\u003eThe Frame Clamps are made in a variety of sizes for almost every tube used on recumbent bikes and trikes, so it is usually possible to install this mount on many trikes as well as some bikes. The mount can go on the top or the bottom, depending on your needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1.125in","offer_id":49313642152180,"sku":"BAT320.1","price":200.0,"currency_code":"USD","in_stock":true},{"title":"1.375in","offer_id":49313642184948,"sku":"BAT320.2","price":200.0,"currency_code":"USD","in_stock":true},{"title":"1.25in","offer_id":49313642217716,"sku":"BAT320.3","price":200.0,"currency_code":"USD","in_stock":true},{"title":"1.5in","offer_id":49313642250484,"sku":"BAT320.4","price":200.0,"currency_code":"USD","in_stock":true},{"title":"40mm","offer_id":44585858728180,"sku":"BAT320.5","price":200.0,"currency_code":"USD","in_stock":true},{"title":"1.625in","offer_id":49313642283252,"sku":"BAT320.6","price":200.0,"currency_code":"USD","in_stock":true},{"title":"1.75in","offer_id":49313642316020,"sku":"BAT320.7","price":200.0,"currency_code":"USD","in_stock":true},{"title":"50mm","offer_id":44585858859252,"sku":"BAT320.8","price":200.0,"currency_code":"USD","in_stock":true},{"title":"2.0in","offer_id":49313642348788,"sku":"BAT320.9","price":200.0,"currency_code":"USD","in_stock":true},{"title":"54mm","offer_id":44585858924788,"sku":"BAT320.10","price":200.0,"currency_code":"USD","in_stock":true},{"title":"60mm","offer_id":44585858990324,"sku":"BAT320.11","price":200.0,"currency_code":"USD","in_stock":true},{"title":"TerraTrike Rover Square Frame Tubing","offer_id":44585859023092,"sku":"BAT320.12","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/20200928_150011_eebb78c6-6a0e-4269-9d1c-4f22771bd31c.jpg?v=1788457877"},{"product_id":"catrike-configured-battery-mount","title":"Catrike Configured Battery Mount","description":"\u003cp\u003eElectric drives on Catrikes are great for transportation and for enabling anyone to get out and ride. Batteries are big, dense and valuable, and you don't want to just stick them anywhere. A rear rack sometimes works, but then the wires have to be extended, the weight is up high, and you can't use the rack for anything else. Introducing T-Cycle's new and improved Battery Mount! An even better way to attach your valuable, heavy battery: centered, low down, and out of the way. You'll hardly know it's there! CNC machined mounting clamps precision made for your Catrike. This battery mount is the super sturdy, elegant battery solution that the Catrikers have been waiting for! On the folding Catrikes, the battery mount has to be on the right in order to work with the fold. Right side configurations include the optional extender to clear the chain. On the Villager, the extender is required for both sides.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What does this do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount allows you to mount a battery under the seat and close to the centerline of your Catrike. This is the very best place to mount a battery, because it's low and centered for better stability. Mounting heavy things like batteries up high over the rear wheel often leads to handling issues. This mount was designed to solve that.\u003c\/p\u003e\n\u003cp\u003e2. Where does it go?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt depends on the model, but on the main tube, generally just behind and under the seat. Whether it goes on the left or right side depends on whether it folds and whether the chainstays would be in the way of the battery. The folders need the battery on the right side so it winds up on the outside after the fold. An optional extender moves things out past the chain on the right or out past other obstacles on the left. All the parts can be flipped and reversed and reconfigured to get a wide range of mounting positions on either side.\u003c\/p\u003e\n\u003cp\u003e3. What kind of batteries can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAll sorts of them. The battery shelf is large and sturdy. We drill and tap it for some of the common batteries, like the BionX and NeoDrives that use standard bottle boss spacing. For other batteries, in shrink wrap or nylon housings, you can usually just strap them on or use zip ties. We make special, additional plates to mount unusual batteries like the BionX rear rack battery and the Falco flat batteries.\u003c\/p\u003e\n\u003cp\u003e4. What size do I need?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWhen you tell us your Catrike model, we know what you need.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003e\n\u003cp\u003eThe mount consists of a heavy duty clamp that attach to the frame, an angle adjustable vertical plate that attaches to the frame clamp, and a battery shelf that attaches to the vertical plate. The frame clamps are sized specifically to your trike. The vertical plate and battery shelf can be rotated to different angles depending on what is needed for your trike. The parts can be combined in different configurations, flipped over, reversed, and used on opposite sides. The combination of adjustments allows the battery shelf to be positioned at different angles and heights according to your needs.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFirst, hold the battery in the area where you would like it to go to get an idea of where the shelf, adapter plate, and frame clamp need to be.\u003c\/li\u003e\n\u003cli\u003eRemove the clamp arch, hold the clamp against the frame, and reinstall the arch.\u003c\/li\u003e\n\u003cli\u003eBe sure to route any cables over the clamp, so they don't get pinched.\u003c\/li\u003e\n\u003cli\u003eTighten the frame clamp, then adjust the angle of the vertical plate as needed.\u003c\/li\u003e\n\u003cli\u003eWhen the vertical plate is positioned, install the shelf at the angle that works best.\u003c\/li\u003e\n\u003cli\u003eAttach your battery to the shelf with bolts, zip ties, or straps, as needed. That's it!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame clamp for all Catrikes is 2.0 inches.\u003c\/li\u003e\n\u003cli\u003eThe frame clamp requires a 5\/8 inch (16mm) area ofá\u003cb\u003estraight\u003c\/b\u003e, round, obstacle free section of main tube. The instructions will tell you where they work best on your trike.\u003c\/li\u003e\n\u003cli\u003eMounts are machined from 6061-T6 aluminum and black anodized. Frame clamps are 5\/8 inch (16mm) wide. The frame clamping bolts are M6 stainless steel, so they are able to support batteries up to about 15 lbs (6.8Kg). Battery mounting holes are M5x0.8, threaded through 0.25 inches (6.3mm) mounting plate.\u003c\/li\u003e\n\u003cli\u003eThe battery Shelf is 5 x 2.5in (13x7cm) and has 14 M5x0.8 threaded holes for attaching batteries or battery adapter plates. The holes are in 2 rows, one with bottle boss spacing and the other with the spacings used by common batteries.\u003c\/li\u003e\n\u003cli\u003eIf you let us know, we can provide bolts and spacers specific to the popular BionX down tube battery. If your battery uses standard bottle boss spacing, it will probably bolt right on. For other batteries, because there are so many different kinds out there, you may need to arrange the fixing of the battery to the shelf. There are extra holes on the battery shelf that are usually sufficient, and you are free to add to them as needed.\u003c\/li\u003e\n\u003cli\u003eWe have an adapter plate for the BionX Type R (Rear Rack) and Falco flat batteries, since both these batteries are very different and don't use bottle boss spacing.\u003c\/li\u003e\n\u003cli\u003eRecommended maximum battery weight is 15 lbs (6.8Kg). These mounts are very stout and can probably handle more, but due to the wide range of conditions out there, we rate them for 15lbs, which is actually a lot of battery.\u003c\/li\u003e\n\u003cli\u003eWe make Battery Mounts for all sorts of trikes. The configurations here are for all the different Catrikes. We have different items for ordering mounts for other trikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ 559 (Extender)","offer_id":44585902506228,"sku":"BAT343.1","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ 700","offer_id":44585972203764,"sku":"BAT343.2","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ Dumont (Extender)","offer_id":44585972236532,"sku":"BAT343.3","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ Expedition","offer_id":44585972269300,"sku":"BAT343.4","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ MAX","offer_id":49313631240436,"sku":"BAT343.25","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ Pocket","offer_id":44585972302068,"sku":"BAT343.5","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ Road AR","offer_id":44585972334836,"sku":"BAT343.6","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ Trail (Extender)","offer_id":44585972367604,"sku":"BAT343.7","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Standard Shelf (2.75\" x 5\") (Fits downtube batteries) \/ Villager (Extender)","offer_id":44585972400372,"sku":"BAT343.8","price":193.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ 559 (Extender)","offer_id":44585902538996,"sku":"BAT343.9","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ 700","offer_id":44585972433140,"sku":"BAT343.10","price":198.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ Dumont (Extender)","offer_id":44585972465908,"sku":"BAT343.11","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ Expedition","offer_id":44585972498676,"sku":"BAT343.12","price":198.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ MAX","offer_id":49313631273204,"sku":"BAT343.26","price":198.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ Pocket","offer_id":44585972531444,"sku":"BAT343.13","price":198.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ Road AR","offer_id":44585972564212,"sku":"BAT343.14","price":198.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ Trail (Extender)","offer_id":44585972596980,"sku":"BAT343.15","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Shimano STePS Downtube Battery \/ Villager (Extender)","offer_id":44585972629748,"sku":"BAT343.16","price":237.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ 559 (Extender)","offer_id":44585902571764,"sku":"BAT343.17","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ 700","offer_id":44585972662516,"sku":"BAT343.18","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ Dumont (Extender)","offer_id":44585972695284,"sku":"BAT343.19","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ Expedition","offer_id":44585972728052,"sku":"BAT343.20","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ MAX","offer_id":49313631305972,"sku":"BAT343.27","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ Pocket","offer_id":44585972760820,"sku":"BAT343.21","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ Road AR","offer_id":44585972793588,"sku":"BAT343.22","price":211.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ Trail (Extender)","offer_id":44585972826356,"sku":"BAT343.23","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries) \/ Villager (Extender)","offer_id":44585972859124,"sku":"BAT343.24","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/bm_343Master.png?v=1788457869"},{"product_id":"battery-mount-extender","title":"Battery Mount Extender","description":"\u003cp\u003eA useful addition to the T-Cycle Battery Mount in instances where you'd like to kick the mount out by 2.5\", the Battery Mount Extender does so in a strong and lightweight manner. \u003c\/p\u003e\n\u003cp\u003eNew sleek design is compatible with Fully Configurable Battery Mount.\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":44586043441396,"sku":"BAT367.1","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/IMG_7472_f798f724-dcf3-44c4-8ab4-15247d8d3198.jpg?v=1788457871"},{"product_id":"battery-mount-vertical-plate","title":"Battery Mount Vertical Plate","description":"\u003cp\u003eEntirely reversible and boasting a 16-hole circular pattern for ultra-versatility, the Vertical Plate for T-Cycle Battery Mounts is the result of years of design and consideration. It's lightweight, strong, easy to use and endlessly adaptable.  \u003cstrong\u003ePlate only.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":44586138894580,"sku":"BAT368.1","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/vertical_plate_solo.jpg?v=1788457864"},{"product_id":"battery-mount-standard-shelf","title":"Battery Mount Standard Shelf","description":"\u003cp\u003eThe Standard Battery Mount Shelf includes holes specifically placed for BionX and Neodrives batteries, as well as holes placed at bottle-mount spacing to accommodate downtube batteries (as well as some bonus holes for attaching to the Adapter Shelf).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eThe ICE Shelf \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003ecannot\u003c\/span\u003e \u003c\/em\u003ebe directly attached to the ICE Rear Rack.\u003c\/strong\u003e\u003c\/h3\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Standard","offer_id":44586190438644,"sku":"BAT369.1","price":60.0,"currency_code":"USD","in_stock":true},{"title":"ICE","offer_id":44586190471412,"sku":"BAT369.2","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/BAT369-StandardShelf.png?v=1788457873"},{"product_id":"battery-mount-adapter-shelf","title":"Battery Mount Adapter Shelf","description":"\u003cp\u003eThe Adapter Shelf is a 12in x 4in platform for larger batteries that attaches directly to the Standard Shelf of a T-Cycle Battery Mount. The plate has mounting holes specific for the BionX, Falco, and Shimano rear rack batteries. It's also useful for supporting large brick type batteries.\u003c\/p\u003e\n\u003cp\u003eAttaches to a T-Cycle Battery Mount shelf with 4 bolts (provided). If you have a Shimano STePS downtube battery, we make a separate mounting rail for that unique mounting system.\u003c\/p\u003e\n\u003cp\u003eMade to extend the size of the platform on a Battery Mount.  With some creativity, may also be used to extend other types of mounts.\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":44586222911732,"sku":"BAT370.1","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/grayedoutadapterplate_6a2f6d61-36bc-4a2a-bda0-61c6eb0ec258.jpg?v=1788457869"},{"product_id":"battery-mount-steps-monorail-rail-only","title":"Battery Mount Steps Monorail (Rail Only)","description":"\u003cp\u003eThis rail attaches directly to the standard shelf to accommodate a Shimano Steps battery.\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":44586253877492,"sku":"BAT371.1","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/grayedoutadapter_b3008176-5c07-49c2-9d65-44652293686d.jpg?v=1788457876"},{"product_id":"ice-configured-battery-mount-suspended-trikes-1","title":"ICE Configured Battery Mount - Suspended Trikes","description":"\u003cp\u003eThis T-Cycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. Batteries are dense and difficult to carry. This mount lets you attach your battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! Down low is important for handling and stability—you don't want something as heavy as a battery on top of a rear rack. If you have been struggling with how to carry your battery, this elegant, simple solution is what you've been looking for!\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. Why do I need a special battery mount?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eBatteries are heavy, so it's best to carry them down low and in a place that won't affect handling. A rear rack or seatback bag are not good solutions- the battery is up higher than it should be, and it tends to be awkward when it's time to fold or transport your trike. This mount is designed to have the rigidity to securely hold your battery, while not interfering with your seat, suspension, rear rack, or the ability to fold your trike. An electric drive is a big investment, and how to properly hold the battery is an important consideration. It was not easy to design this mount, there are not a lot of places a battery can go where everything works.\u003c\/p\u003e\n\u003cp\u003e2. How does it attach?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt attaches with a special mount through the suspension pivot, along with a stabilizing attachment up at the rack mount near the seatback adjustment. The suspension pivot is very strong, and is a great place to attach something heavy like a battery. We supply spacers for the rack attachment point that work with or without a rear rack in place.\u003c\/p\u003e\n\u003cp\u003e3. Can I still fold my trike?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, the battery winds up on top, just ahead of the rear hinge.\u003c\/p\u003e\n\u003cp\u003e4. Is it strong enough?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eMy battery is pretty heavy. Yes, the attachment mechanism and the mount itself are designed to carry batteries weighing up to 20 lbs (9kg).\u003c\/p\u003e\n\u003cp\u003e5. Is ICE OK with this?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis mount is the result of extensive thought and prototyping involving ICE and Icletta, our EU distributor and the ICE distributor for Germany, Austria, and Switzerland. This mount has been in use in Europe for 3 years; we haven't introduced it more broadly until now because we have been production capacity limited.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eAttachment is straightforward and only takes a few minutes. The first step is to attach the main support arm to the suspension pivot.\u003c\/p\u003e\n\u003cp\u003eThe main support arm goes inside the suspension pivot tube on the right (drivetrain) side of the trike. Remove the 8mm bolt and cap from the arm and insert the arm inside the pivot tube. The arm and the cap have shims to work with the different tube IDs ICE has used over the years. The largest shims come preinstalled on the arm and cap. If they fit inside the tube, use them. If not, try the next size down, and if that is still too large, use no shim at all.\u003c\/p\u003e\n\u003cp\u003eOnce the arm is properly fitted inside the pivot tube, configure the cap to the same size and install it from the other side. Position the arm so the outer end is parallel to and underneath the power side chain tube. Tighten the 8mm bolt that holds the cap.\u003c\/p\u003e\n\u003cp\u003eNext, attach the vertical plate to the support arm. Rotate the plate so the slot at the top lines up with the rack attachment point. If you have a rear rack, use the short spacer and bolt to attach to the threaded hole in the rack attachment point. If you don't have a rear rack, insert the threaded bushing into the empty 8mm hole in the rack attachment, then use the long spacer and bolt to attach to that.\u003c\/p\u003e\n\u003cp\u003eAttach your battery. The mount comes drilled and tapped for Ansmann or BionX batteries, and you can easily adapt other battery systems. Batteries designed to be strapped to a rack can be strapped to the shelf and\/or the vertical plate. The shelf and plate are designed to be drilled for additional mounting holes if needed.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUnfortunately, this battery mount is incompatible with the ICE rear rack that attaches using the pivot tube.  In this case, we suggest checking for unobstructed straight tubing on your main tube (at least 0.625in long) and using our Fully Configurable Battery Mount with a 1.75\" clamp. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWe originally developed this mount at the request of Icletta, our EU distributor. They are also the ICE distributor for Germany, Austria, and Switzerland. Electric bikes and trikes are very big in Europe, and Icletta wanted a first class way to hold the battery. We consulted with ICE and Icletta as the development progressed.\u003c\/li\u003e\n\u003cli\u003eThe design goals for this mount were:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1. Allow the battery to be firmly held down as low as possible, so handling would not be affected.\u003c\/li\u003e\n\u003cli\u003e2. Position the battery and mount so they would not interfere with the fold in any way, and \u003c\/li\u003e\n\u003cli\u003e3. Allow the attachment of a wide range of battery types, with specific versions for the BionX, Ansmann, and Falco batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eFolding is unaffected, and the battery winds up in a convenient spot after the fold. And, the design very simply provides for mounting all kinds of batteries, including very heavy ones.\u003c\/li\u003e\n\u003cli\u003eAll parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel.\u003c\/li\u003e\n\u003cli\u003eThe primary attachment is to the right side of the suspension pivot tube. A special Z shaped arm goes under the power side chain and attaches to the inside of the pivot tube. A mounting plate goes up from outside the chain up to the rear rack attachment point by the seatback adjustment QR. A shelf attaches the the bottom of the mounting plate to hold the battery. The shelf is drilled and tapped to accept the BionX downtube mounting rail, but other batteries can be easily mounted. The Ansmann battery system is designed to attach to a vertical plate, so it doesn't need the shelf at all. Batteries in nylon packs can be strapped to the shelf and to the vertical plate.\u003c\/li\u003e\n\u003cli\u003eWe also make an adapter plate for larger batteries.\u003c\/li\u003e\n\u003cli\u003eThe battery Shelf is 6 x 3.25in (15.25 x 8.25cm) and has 15 M5x0.8 threaded holes for attaching batteries or battery adapter plates. 13 of the holes are in 2 rows with bottle boss spacing used by many batteries.\u003c\/li\u003e\n\u003cli\u003eSpacers and mounting hardware are provided for the rear rack attachment point for trikes with and without a rear rack. Only one or the other sets of hardware is used.\u003c\/li\u003e\n\u003cli\u003eBoth the vertical plate and the shelf are made from 1\/4 inch (6.35mm) thick aluminum. This means it is both very sturdy and easily drilled to modify needed for your particular battery system.\u003c\/li\u003e\n\u003cli\u003eCompatible with all suspended ICE trikes from 2010 onwards. Earlier suspended ICE trikes with the large twin tube swing arms will not work, but all later trikes will. This mount is very specific to the suspended ICE trikes, so it won't work with other brands. If you have a rigid rear ICE Trike, we make a separate model for that. We have a Universal Battery Mount that works on nearly all trikes, but doesn't work with the fold on an ICE trike like this ICE specific mount does.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Before June 2015 \/ Standard Shelf (2.75\" x 5\") (Fits downtube batteries)","offer_id":49313863336180,"sku":"BAT208.1","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Before June 2015 \/ Add Shimano STePS Downtube Battery","offer_id":49313863368948,"sku":"BAT208.2","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Before June 2015 \/ Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries)","offer_id":49313863401716,"sku":"BAT208.3","price":232.0,"currency_code":"USD","in_stock":true},{"title":"After June 2015 \/ Standard Shelf (2.75\" x 5\") (Fits downtube batteries)","offer_id":49313863434484,"sku":"BAT208.4","price":175.0,"currency_code":"USD","in_stock":true},{"title":"After June 2015 \/ Add Shimano STePS Downtube Battery","offer_id":49313863467252,"sku":"BAT208.5","price":219.0,"currency_code":"USD","in_stock":true},{"title":"After June 2015 \/ Add Adapter Shelf (12\" x 4\") (Fits rear rack and large batteries)","offer_id":49313863500020,"sku":"BAT208.6","price":232.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/resized_terracycle_akkuhalter_3700_neodrives_freigestellt_fd80a87c-6d39-4cda-a1e4-7c80f424c587.jpg?v=1788458055"},{"product_id":"hp-scorpion-configured-battery-mount","title":"HP Scorpion Configured Battery Mount","description":"\u003cp\u003e\u003cspan\u003eFocus on the joy and not the assembly with the effortless installation of TerraCycle's innovative battery mount for the HP Velotechnik Scorpion\u003c\/span\u003e.  Designed to fit both the drive and non-drive sides, this kit is compatible with 20in and 26in wheels and can be used with or without a rear rack. Its elegant design and easy-to-follow installation process make it a must-have for any Scorpion owner!\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eFollow along with Mike as he demonstrates how to install on both non-drive and drive side!\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_Y31_grN-UQ?si=5L0Ry8pAvc4GSjNF\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313635598580,"sku":"BAT420.1","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/scrop_bat_plate_copy_53ce3862-b3de-4490-bdf4-cdf59acfc3f1.jpg?v=1788457872"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/collections\/Fully-Configurable-Ferris-Wheel.gif?v=1788455326","url":"https:\/\/falcoedrive.com\/collections\/t-cycle-battery-mounts.oembed","provider":"Falco eMotors Inc.","version":"1.0","type":"link"}