{"title":"Accessory Mounts","description":"\u003cp\u003eCockpit mounts, light mounts, clamps, and tubing from T-Cycle for computers, lights, mirrors, and more.\u003c\/p\u003e","products":[{"product_id":"2-bolt-wedge-t-clamp","title":"2-Bolt Wedge T-Clamp","description":"\u003cp\u003eThis super versatile, super strong T clamp lets you attach two 7\/8 inch (22.2mm) tubes or two 1 inch (25.4mm) tubes at 90 degrees to each other .  One end of the T-clamp goes inside of and clamps to one of the tubes, while the outside of other tube is clamped by a discreet but sturdy machined arch. You are free to choose which tube gets clamped which way. The 7\/8 inch and 1 inch size means it's useful in all kinds of places. We use this clamp on our neckrest mounts, SeatSide mounts, and we even use it to make display stands when we go to shows. Note: that this clamp is designed to hold accessories; it is NOT designed to hold handlebars in place.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What's it for?\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eIt's for making mounts and structures based on 7\/8 in (22.2mm) tubes and 1 in tubes. We use them to make neckrest mounts that are more adjustable and break down for transport. We use them to make our SeatSide Mounts, and we have used them to make custom supports, jigs in the shop, all sorts of things. Basically, any time you'd like to be able to stick two tubes together 90 degrees to each other, this is a great clamp to do it.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e2. How does it work?\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eIn one direction, the clamp has an internal wedge mechanism, basically like a stem for a threaded fork. You put it inside a tube, tighten, and it locks in. In the other direction, it has a saddle and a clamp arch, kind of like a face clamp on a handlebar stem. You slide a tube in, clamp the arc, and everything is locked together.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e3. Can I use it to hold my handlebars?\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eWhile it's strong, it's not a proper handlebar stem and it is not suitable for holding any part of your steering system together. It's great for attaching accessories to your handlebars, but it's not designed to handle steering forces.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab \" title=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eA versatile clamp with a variety of uses. Designed to be very compact yet strong enough to lots of uses. That said, it's not designed to handle steering forces, so you can't use it to hold your handlebars together. Wedge clamp is optimized for 7\/8 x 0.065 wall tubing (with an ID of 0.745-ish inches or 18.9mm). Face clamp is optimized for painted 7\/8 in OD tubing. It will clamp a variety of other things, you'll need to test it when you are using it on tubing with different specs.\u003c\/li\u003e\n\u003cli\u003eMachined from 6061T6 aluminum and anodized black. All fasteners are stainless. Face clamp is 1.4in (35.5mm) wide. Wedge clamp is 1.0in (25.4mm) deep. Wedge clamp bolt is m6 with a 5mm socket head, arch clamp bolts are m4 with a 3mm socket head. Not for use as an integral part of a steering system, but may be used to attach accessories to handlebars.\u003c\/li\u003e\n\u003cli\u003eFits nearly any place* you'd like to attach one 7\/8 tube to another.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab \" title=\"\"\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab \" title=\"\"\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab \" title=\"\"\u003e\n\u003cblockquote\u003e\n\u003cp\u003e*Not for use in holding your steering system together- you need proper handlebar stems\/bar ends for that.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"7\/8in Clamp \/ 7\/8in Wedge","offer_id":49313171013876,"sku":"ACH031.2","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1in Clamp \/ 1in Wedge","offer_id":49313171046644,"sku":"ACH031.1","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1in Clamp \/ 7\/8in Wedge","offer_id":49313171079412,"sku":"ACH031.3","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/2BoltWedgeT-Clampsfront.jpg?v=1788457468"},{"product_id":"2-bolt-double-ended-clamp","title":"2-Bolt Double-Ended Clamp","description":"\u003cp\u003eAn essential building block for anyone looking to tinker toy their way to recumbent success is the Double-Ended Clamp! The open-ended two-bolt setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the \u003cspan\u003eDouble-Ended Clamp's\u003c\/span\u003e grip securely clamps into place, holding light accessories or mounts wherever you want them to be. \u003cspan data-mce-fragment=\"1\"\u003eThese clamps measures 2\" from the center of one clamped tube to the center of the other clamped tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What an odd shaped clamp. How does it work?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis clamp is designed to be a low clearance, medium duty clamp that's easy to install. That's why the ends are open- it gives you more room to get up close to things, and it makes it easier to install the clamp. The sides just pop apart and you put the clamp where you want. Usually, all you have to do is remove one bolt and loosen the other to wrap the clamp around a tube.\u003c\/p\u003e\n\u003cp\u003e2. What can I hold with it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAny round, straight tube that is the right diameter. We an ever-growing library of clamp sizes. It's important the tube is straight for the 1\/2 inch (12.7mm) where the clamp is attached. The tube can curve around in other places, but where the clamp is attached needs to be straight.\u003c\/p\u003e\n\u003cp\u003e3. How strong it it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003ePretty strong, we call it light duty because the four-bolt Double-Ended Clamps are meant for most applications. It's designed for versatility and ease of installation more than maximum strength. It's designed to hold light accessories (under 2 lbs, 1kg or so). It definitely not designed for attaching critical things like steering components, heavy accessories, or exit assist handles. What it can handle strongly depends on the amount of leverage you put on it of course, so the overall design matters a lot.\u003c\/p\u003e\n\u003cp\u003e4. Can I use it on things that aren't the \"proper\" size?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. For the clamp to grip well, it needs to be gripping something that is round, straight, and the rated size. Fortunately, that is usually possible.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from 6061 aluminum, anodized black. Available in multiple sizes, be sure to use clamps sized exactly for the tubing you wish to clamp.\u003c\/li\u003e\n\u003cli\u003e7\/8\" (22.2mm) to 7\/8\" (22.2mm) clamp weighs 41 grams. 1\" (25.4mm) to 7\/8\" (22.2mm) clamp weighs 43 grams. Anodized black coating, stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003eThere are three basic ways to install a clamp, depending on the tube it is going on. The first is to loosen the bolts and slide the clamp over the tube(s). If there are obstacles on one of the tubes, you'll need to remove one bolt, loosen the other, swivel the clamp open, and put it over the tube. If both tubes have obstacles, simply remove both bolts, put the halves of the clamp around the tubes, and reinstall the bolts.\u003c\/li\u003e\n\u003cli\u003eFits nearly any place you would like to clamp two tubes so they are parallel to each other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"5\/8in-7\/8in","offer_id":49313171177716,"sku":"ACH040.1","price":34.0,"currency_code":"USD","in_stock":true},{"title":"7\/8in-7\/8in","offer_id":49313171210484,"sku":"ACH040.2","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1in-7\/8in","offer_id":49313171243252,"sku":"ACH040.3","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Double_Ended_Cockpit_Clamp_5-8_7-8.jpg?v=1788457468"},{"product_id":"4-bolt-double-ended-clamp","title":"4-Bolt Double-Ended Clamp","description":"\u003cp\u003eAn essential building block for anyone looking to tinker toy their way to recumbent success is the Double-Ended Clamp! The open-ended four-bolt setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the \u003cspan\u003eDouble-Ended Clamp's\u003c\/span\u003e grip securely clamps into place, holding light accessories or mounts wherever you want them to be. \u003cspan data-mce-fragment=\"1\"\u003eThese clamps measures 2\" from the center of one clamped tube to the center of the other clamped tube.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What an odd shaped clamp. How does it work?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis clamp is designed to be a low clearance, medium duty clamp that's easy to install. That's why the ends are open- it gives you more room to get up close to things, and it makes it easier to install the clamp. The sides just pop apart and you put the clamp where you want.\u003c\/p\u003e\n\u003cp\u003e2. What can I hold with it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAny round, straight tube that is the right diameter. We an ever-growing library of clamp sizes. It's important the tube is straight for the 1\/2 inch (12.7mm) where the clamp is attached. The tube can curve around in other places, but where the clamp is attached needs to be straight.\u003c\/p\u003e\n\u003cp\u003e3. How strong it it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe four-bolt Double-Ended Clamps are meant for most applications. It's definitely not designed for attaching critical things like steering components, heavy accessories, or exit assist handles. What it can handle strongly depends on the amount of leverage you put on it of course, so the overall design matters a lot.\u003c\/p\u003e\n\u003cp\u003e4. Can I use it on things that aren't the \"proper\" size?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. For the clamp to grip well, it needs to be gripping something that is round, straight, and the rated size. Fortunately, that is usually possible.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from 6061 aluminum, anodized black. Available in multiple sizes, be sure to use clamps sized exactly for the tubing you wish to clamp.\u003c\/li\u003e\n\u003cli\u003eSimply remove both bolts, put the halves of the clamp around the tubes, and reinstall the bolts.\u003c\/li\u003e\n\u003cli\u003eFits nearly any place you would like to clamp two tubes so they are parallel to each other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"7\/8in-7\/8in","offer_id":49313171931380,"sku":"SMH273.1","price":45.0,"currency_code":"USD","in_stock":true},{"title":"1in-7\/8in","offer_id":49313171964148,"sku":"SMH273.2","price":45.0,"currency_code":"USD","in_stock":true},{"title":"28.6mm-22.2mm","offer_id":49313171996916,"sku":"SMH273.3","price":47.0,"currency_code":"USD","in_stock":true},{"title":"30mm-22.2mm","offer_id":49313172029684,"sku":"SMH273.4","price":45.0,"currency_code":"USD","in_stock":true},{"title":"31.8mm-22.2mm","offer_id":49313172062452,"sku":"SMH273.5","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/20191127_122204.jpg?v=1788457469"},{"product_id":"many-ways-clamp-qr","title":"Manyways Clamp (QR)","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: Manyways Clamps are plenty strong for holding accessories, but they are NOT strong enough to serve as an exit assist.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv id=\"productGeneral\" style=\"display: inline !important;\"\u003e\u003cform name=\"cart_quantity\" method=\"post\" enctype=\"multipart\/form-data\" style=\"display: inline !important;\" action=\"http:\/\/t-cycle.com\/accessory-mounting-c-71\/accessory-mounts-c-71_73\/cockpit-mountvertical-attachment-p-39.html?action=add_product\u0026amp;number_of_uploads=0\"\u003e\n\u003cdiv style=\"display: inline !important;\"\u003e\n\u003cdiv title=\"\" style=\"display: inline !important;\"\u003e\n\u003cdiv style=\"display: inline !important;\"\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"5\/8in \/ 7\/8in","offer_id":49313177501940,"sku":"NEK120.3","price":90.0,"currency_code":"USD","in_stock":true},{"title":"3\/4in \/ 7\/8in","offer_id":49313177534708,"sku":"NEK120.7","price":90.0,"currency_code":"USD","in_stock":true},{"title":"7\/8in \/ 7\/8in","offer_id":49313177567476,"sku":"NEK120.1","price":90.0,"currency_code":"USD","in_stock":true},{"title":"1in \/ 7\/8in","offer_id":49313177600244,"sku":"NEK120.2","price":90.0,"currency_code":"USD","in_stock":true},{"title":"28mm \/ 7\/8in","offer_id":49313177633012,"sku":"NEK120.8","price":90.0,"currency_code":"USD","in_stock":true},{"title":"30mm \/ 7\/8in","offer_id":49313177665780,"sku":"NEK120.5","price":90.0,"currency_code":"USD","in_stock":true},{"title":"31.8mm (1.25in) \/ 7\/8in","offer_id":49313177698548,"sku":"NEK120.6","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/IMG_7696_527891d8-57cf-45c2-944c-67306a3f9168.jpg?v=1788457473"},{"product_id":"7-8in-od-black-painted-aluminum-tubing","title":"7\/8in OD Black Aluminum Tubing","description":"Need a piece of standard 7\/8 inch tube to make a unique bracket or mount? Here's what you need, in several precut useful lengths! \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eComes with plastic end plugs\u003c\/li\u003e\n\u003cli\u003e7\/8in (22.2mm) Outer Diameter\u003c\/li\u003e\n\u003cli\u003e0.065in (1.651mm) Wall\u003c\/li\u003e\n\u003cli\u003e6061 T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack powder coated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e7\/8 inch is a very common tube size on bikes, especially around the handlebars. We make lots of clamps that attach to 7\/8 inch, and there are lots of accessories and mounts out there that are 7\/8, too.\u003c\/p\u003e\n\u003cp\u003eTip: Check out our T clamps and Cockpit clamps if you want to build up a structure with these tubes.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1.5in","offer_id":49313178157300,"sku":"SMH274.1","price":9.0,"currency_code":"USD","in_stock":true},{"title":"4in","offer_id":49313178190068,"sku":"SMH274.2","price":11.0,"currency_code":"USD","in_stock":true},{"title":"7in","offer_id":49313178222836,"sku":"SMH274.3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"9in","offer_id":49313178255604,"sku":"SMH274.4","price":15.0,"currency_code":"USD","in_stock":true},{"title":"11in","offer_id":49313178288372,"sku":"SMH274.5","price":17.0,"currency_code":"USD","in_stock":true},{"title":"13in","offer_id":49313178321140,"sku":"SMH274.6","price":19.0,"currency_code":"USD","in_stock":true},{"title":"18in","offer_id":49313178353908,"sku":"SMH274.7","price":22.0,"currency_code":"USD","in_stock":true},{"title":"20in","offer_id":49313178386676,"sku":"SMH274.8","price":25.0,"currency_code":"USD","in_stock":true},{"title":"22in","offer_id":49313178419444,"sku":"SMH274.9","price":27.0,"currency_code":"USD","in_stock":true},{"title":"26in","offer_id":49313178452212,"sku":"SMH274.10","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/TubeyTubes.jpg?v=1788457473"},{"product_id":"clampon-bottle-cage","title":"Clamp-on Bottle Cage","description":"\u003cp\u003eThis easy to mount and easy to use bottle cage affixes to 7\/8\" tubing, the size of most handlebars and all of our SeatSide Mount Mounting Bars. We don't make this item; it's a good quality system that we were able to find after a fair bit of searching and testing. The clamp size is natively 7\/8\" (22.2mm), so it doesn't need shims to clamp to handlebar sized things and to our Seatside Mounts and Handlebar Accessory Mounts. Turns out a Seatside Mount can be a handy place to stash another water bottle!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"800\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/q56wT5sV4xk\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313632911604,"sku":"FBW302.1","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/BottleCageSideView.jpg?v=1788457870"},{"product_id":"extra-long-double-ended-cockpit-clamp","title":"Extra Long Double-Ended Clamp (Single)","description":"\u003cp\u003eAn extended version of the Double-Ended Clamp, this clamp reaches places that no Double-Ended Clamp has ever reached before, while sharing all of the same qualities that we know and love. These clamps measures 5\" from the center of one clamped tube to the center of the other clamped tube.\u003c\/p\u003e\n\u003cp\u003eThe same-sided bolt setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Extra Long Double-Ended Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What an odd shaped clamp. How does it work?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis clamp is designed to be a low clearance, medium duty clamp that's easy to install. The sides just pop apart and you put the clamp where you want. Usually, all you have to do is temporarily remove the bolts to wrap the clamp around a tube.\u003c\/p\u003e\n\u003cp\u003e2. What can I hold with it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAny round, straight tube that is the right diameter. We an ever-growing library of clamp sizes. It's important the tube is straight for the 1\/2 inch (12.7mm) where the clamp is attached. The tube can curve around in other places, but where the clamp is attached needs to be straight.\u003c\/p\u003e\n\u003cp\u003e3. How strong it it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003ePretty strong, we call it medium strength. It's designed for versatility and ease of installation more than maximum strength. It's designed to hold  accessories (under 5 lbs, 2kg or so). It definitely not designed for attaching critical things like steering components, heavy accessories, or exit assist handles. What it can handle strongly depends on the amount of leverage you put on it of course, so the overall design matters a lot. It is possible to boost the strength considerably by using a pair of clamps spaced apart from one another, we do that on some of the SeatSide Mounts.\u003c\/p\u003e\n\u003cp\u003e4. Can I use it on things that aren't the \"proper\" size?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. For the clamp to grip well, it needs to be gripping something that is round, straight, and the rated size. Fortunately, that is usually possible.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eClamp measures 5\" from the center of one clamped tube to the other.\u003c\/li\u003e\n\u003cli\u003eMachined from 6061 aluminum, anodized black. Available in two sizes, be sure to use clamps sized exactly for the tubing you wish to clamp.\u003c\/li\u003e\n\u003cli\u003e7\/8\" (22.2mm) to 7\/8\" (22.2mm) clamp weighs 112 grams. 1\" (25.4mm) to 7\/8\" (22.2mm) clamp weighs 104 grams. Anodized black coating, stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003eInstallation is simple.  Temporarily remove the bolts, put the halves of the clamp around the tubes, and reinstall both of the middle bolts. With the middle bolts tightened lightly, you can adjust things around  to where you need them. When things are where you want them, add the outer bolts and tighten things up.\u003c\/li\u003e\n\u003cli\u003eFits many places where you would like to clamp two tubes so they are parallel to each other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"7\/8in-7\/8in","offer_id":49313635533044,"sku":"ACH041.1","price":55.0,"currency_code":"USD","in_stock":true},{"title":"1in-7\/8in","offer_id":49313635565812,"sku":"ACH041.2","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/extender1_jpg.png?v=1788457873"},{"product_id":"4x5-l-bar","title":"4in x 5in T-Bar","description":"\u003cdiv class=\"row space-under\"\u003e\n\u003cdiv class=\"half column product-details\"\u003e\n\u003cdiv class=\"section\"\u003e\u003cform class=\"product-form\" method=\"post\" enctype=\"multipart\/form-data\" data-product-id=\"550709985339\" data-enable-history-state=\"true\" action=\"https:\/\/t-cycle.com\/cart\/add\"\u003e\n\u003cdiv class=\"quantity\"\u003e\n\u003clabel for=\"quantity\"\u003e\u003c\/label\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-description rte spaced-row reading-column\" itemprop=\"description\"\u003e\n\u003cp\u003eThe 4in x 5in T-Bar is actually made out of two 4.5in pieces of aluminum tubing.  One of them is mitered and welded into the other, giving a full height of just over 5in.  Because the weld takes up room on the other tube, we round it out and call it about 4in long. Instead of offering up a \"4.28in x 4.5in (But Also There's A Weld) T-Bar,\" we shortened the name to lessen the mouthful, saving you time to mount your accessories and ride while the weather's still nice.\u003c\/p\u003e\n\u003cp\u003eClamp not included.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available as part of the \"\u003ca href=\"\/products\/bar-end-shifter-mount\"\u003eBar End Shifter Mount\u003c\/a\u003e\" if you would like the T-bar with clamp included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313864286452,"sku":"ACH035.1","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/L_bar.jpg?v=1788458059"},{"product_id":"5-x-9-t-bar","title":"5in x 9in T-Bar","description":"\u003cp\u003eThe 5in x 9in Asymmetric T-Bar allows a full 5in for mounting possibilities. At 7\/8in wide, most any accessory that fits handlebars will fit the T-Bar. 9in tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater creativity to take place, to the left and to the right.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5\" offset arm and 9\" long stem\u003c\/li\u003e\n\u003cli\u003e8.6\" of full vertical adjustment\u003c\/li\u003e\n\u003cli\u003eMade from 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003ePowder coated black\u003c\/li\u003e\n\u003cli\u003eWeighs 87 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313864909044,"sku":"ACH042.1","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/5inx9inT-Bar.jpg?v=1788458059"},{"product_id":"90-degree-elbow","title":"90° Elbow","description":"\u003cp\u003eThe 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7\/8\" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"854\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/q56wT5sV4xk\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\nBig thanks to Ja Yoe for the videos. Visit \u003ca href=\"http:\/\/jayoe.com\/\" target=\"_blank\" rel=\"noopener\"\u003eJaYoe.com\u003c\/a\u003e to keep up with his travels. \n\u003ch2\u003e\u003cspan\u003eADDITIONAL INFO\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1.5\" long in each direction\u003c\/li\u003e\n\u003cli\u003eMade from 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003ePowder coated black\u003c\/li\u003e\n\u003cli\u003eWeighs 30 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313865138420,"sku":"ACH044.1","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/90DegreeElbow.jpg?v=1788458059"},{"product_id":"accessory-mount-90-degree-adapter","title":"Accessory Mount 90° Adapters","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: price is for one pair.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of 90° Mounting Adapters allows you to bolt your Accessory Mount in brand new places and directions. Whether you want to attach your Accessory Mount directly to a pair of threaded holes on your bike, or need your Accessory Mount Clamps to attach at 90° angles, these adapters will exponentially increase your options. Comes with bolts to attach the adapters to the Accessory Mount.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What exactly do these things do?\u003c\/p\u003e\n\u003cp\u003eThey let you attach an Accessory Mount arm (or something else, if you wish) 90 degrees from the way you would ordinarily be able to mount it. Kind of like an L bracket, but with special features that let you do more.\u003c\/p\u003e\n\u003cp\u003e2. What sort of special features?\u003c\/p\u003e\n\u003cp\u003eThe first feature is that one side (generally, the side you attach the Accessory Mount arm to) is  threaded for an m5 bolt. This makes it super easy to attach to it. The second feature is there is a machined ring around the top of the second bolt hole. If you are using a Cateye clamp to attach to a tube, this machined ring plugs into the boss on the Cateye clamp and makes the connection to the clamp very secure.\u003c\/p\u003e\n\u003cp\u003e3. Where would I use them?\u003c\/p\u003e\n\u003cp\u003eUsually, when you attach an Accessory Mount, you use a Cateye clamp, and the bolt through the arm also goes through the clamp. This winds up making the tube in the middle of the Accessory Mount where you actually attach things perpendicular to whatever tube on your bike you are attaching to. Often, this is what you want, so you don't need anything additional.\u003c\/p\u003e\n\u003cp\u003eIf you want to have the tube in the middle of the Accessory Mount where you actually attach things\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e\u003ci\u003eparallel\u003cspan\u003e \u003c\/span\u003e\u003c\/i\u003e\u003c\/b\u003eto whatever tube on your bike you are attaching to (say, you want to attach the Accessory Mount to your handlebars, and have the Accessory Mount out in front with a light on it), then you need these adapters.\u003c\/p\u003e\n\u003cp\u003eThe other common place where they are used is to eliminate the use of the Cateye Clamps when you are attaching to places like bottle bosses. It makes a very clean setup that way.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab \" title=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from 6061 T6 aluminum and black anodized.\u003c\/li\u003e\n\u003cli\u003eOne side is threaded m5, and the other side has an m5 clearance hole.\u003c\/li\u003e\n\u003cli\u003eIf you are using them with Cateye clamps, press the adapter into the Cateye clamp before installing it on your bike. Rotate the adapter into position and insert the bolt to tighten the clamp. When the Cateye bolt is loosely tightened, attach the Accessory Mount, then fine tune the alignment of the Cateye clamp and tighten the Cateye bolt.\u003c\/li\u003e\n\u003cli\u003eFits any bike or trike where you wish you could rotate the attachment points 90 degrees.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313865269492,"sku":"ACA206.1","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/adapters_solo.jpg?v=1788458061"},{"product_id":"accessory-mount-clamps-pair","title":"Accessory Mount Clamps (Pair)","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: price is for one pair.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you buy an Accessory Mount or Flag Mount, you get a pair of these very handy Cateye clamps. They are super useful in lots of other places as well. We use them in some of our Fairing Mounts, our Long Wheelbase Light Mounts, and even on some of the equipment around the shop! Get different sized pair for your already super-adaptable Accessory Mount and give it an extra dose of ultra-adaptability, or create your own uses! Seven different sized clamps fit just about any bike. Adjusting shims included to get the exact fit. The stainless steel socket head cap screw maximizes durability and strength, while the smooth, black super tough nylon makes them an inconspicuous and sleek addition to any cycle. Accessory Mounts allow for crazy clever configurations, so if your clamps need to be different sizes, make a note of it on your order.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What are these, anyway?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThey are Cateye brand plastic mounting clamps, modified in a handy way for use with attaching our Accessory Mounts.\u003c\/p\u003e\n\u003cp\u003e2. How do I know what size I need?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYou need to measure the outer diameter of the tube at the point at which you want to clamp. Then, choose the size of clamp that covers the size of your tube. You fine tune the fit of the clamp by trimming the length of the provided shim (the shim isn't needed for paint protection, it's purpose is to adjust the fit).\u003c\/p\u003e\n\u003cp\u003e3. You sell them in pairs, right?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, this price is for a pair. If you are doing something creative that involves attaching to two DIFFERENT sized tubes, we can manage that. Just make note of this on your order.\u003c\/p\u003e\n\u003cp\u003e4. Can I use them on tubes that aren't round?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, as long as they are not too far off round. An oval of about 2:3 is about the max you can do.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv title=\"\" class=\"tabbertab\"\u003e\n\u003cdiv class=\"productGeneral biggerText\"\u003e\n\u003cul\u003e\n\u003cli\u003eThese clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. We've made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt.\u003c\/li\u003e\n\u003cli\u003eThe clamps come in 1\/8 inch increments from 1\/2 inch to 1-1\/4 inch. Order the size that covers the size of tube you have.\u003c\/li\u003e\n\u003cli\u003eCateye brand nylon band mounting clamps with trimmable adjusting shim. Modified by adding a spacer to move the attachment point out and provide a firm base for attaching things like Accessory Mounts. We replace the black steel screw provided by Cateye with a stainless Allen head bolt so you can use regular bike tools (and not have to worry about rust).\u003c\/li\u003e\n\u003cli\u003eCompatible with all bikes and trikes with round or nearly round tubes in the range of 1\/2 inch (12mm) to 1-1\/4 inch (31.8mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1\/2in \/ Accessory Mount","offer_id":49313866154228,"sku":"ACH030.2","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1\/2in \/ Flag Mount","offer_id":49313866186996,"sku":"ACH030.3","price":15.0,"currency_code":"USD","in_stock":true},{"title":"5\/8in \/ Accessory Mount","offer_id":49313866219764,"sku":"ACH030.6","price":15.0,"currency_code":"USD","in_stock":true},{"title":"5\/8in \/ Flag Mount","offer_id":49313866252532,"sku":"ACH030.7","price":15.0,"currency_code":"USD","in_stock":true},{"title":"3\/4in \/ Accessory Mount","offer_id":49313866285300,"sku":"ACH030.10","price":15.0,"currency_code":"USD","in_stock":true},{"title":"3\/4in \/ Flag Mount","offer_id":49313866318068,"sku":"ACH030.11","price":15.0,"currency_code":"USD","in_stock":true},{"title":"7\/8in \/ Accessory Mount","offer_id":49313866350836,"sku":"ACH030.14","price":15.0,"currency_code":"USD","in_stock":true},{"title":"7\/8in \/ Flag Mount","offer_id":49313866383604,"sku":"ACH030.15","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1in \/ Accessory Mount","offer_id":49313866416372,"sku":"ACH030.18","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1in \/ Flag Mount","offer_id":49313866449140,"sku":"ACH030.19","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/8in \/ Accessory Mount","offer_id":49313866481908,"sku":"ACH030.22","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/8in \/ Flag Mount","offer_id":49313866514676,"sku":"ACH030.23","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4in \/ Accessory Mount","offer_id":49313866547444,"sku":"ACH030.26","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4in \/ Flag Mount","offer_id":49313866580212,"sku":"ACH030.27","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/ACH03002-2.png?v=1788458062"},{"product_id":"accessory-mount-extender-kit","title":"Accessory Mount Extender Kit","description":"\u003cp\u003eThe Accessory Mount Extender Kit does just what it says it does: adds mounting space to the side of your Accessory Mount. The extra room allows you to mount lots of different lights, electronics, and other mountables. For anyone who likes to have a small blinking light alongside their main light, the Accessory Mount Extender Kit is key. The kit comes with a 15mm extender tube, fitted end cap, a longer stainless bolt and instructions. Get two to extend both ways and maximize your mounts!  CNC machined in our shop in Portland, OR, USA.\u003c\/p\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313867006196,"sku":"ACA029.1","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/am_extender_r3q1.jpg?v=1788458063"},{"product_id":"adjustomatic-bottle-mount","title":"Adjustomatic Bottle Mount","description":"\u003cp\u003eIncredibly versatile, the Adjustable Water Bottle Mount can hold up to two different water bottle holders in a variety of heights and angles. Either fine tune your angle for perfect reaching capability, or lock in to one of three preset positions for ease and maximum staying power; then bolt your water bottle holders at a height that works best for you! Bolts in place on any standard bottle mount location. Great for trikes, your bottles can be more vertical so no drips, the Adjustable Water Bottle Holder will make sure your bottle is never out of reach again!\u003c\/p\u003e\n\u003cp\u003eDisclaimer: If your Trike has raised water bottle bosses, such as those that are found on an ICE Trike, please let us know in your order notes. These trikes require longer mounting bolts. Running an Adjustomatic, or any multi-bottle system on these bosses without longer hardware can result in damage. \u003c\/p\u003e\n\u003cp\u003eTo see a review done by \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/trikeasylum.wordpress.com\/2013\/11\/04\/terracycle-adjustomatic-bottle-mount\/\" target=\"_blank\"\u003eTrike Asylum, Click Here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pCSiXCZcaM0\" height=\"480\" width=\"854\" allowfullscreen=\"\" allow=\"autoplay; encrypted-media\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. How does it attach?\u003c\/p\u003e\n\u003cp\u003eIt attaches to any standard bottle mount. So, any place you could attach a bottle cage, you can attach this adjustable mount that will hold 2 cages. We provide all the stainless m5 bolts you will need for both attaching the mount to your bike\/trike and for attaching 2 bottle cages to the mount.\u003c\/p\u003e\n\u003cp\u003e2. What is the angle adjustment range?\u003c\/p\u003e\n\u003cp\u003eThe angle of the mast can be adjusted from straight up (perpendicular) down to 45 degrees. The mount can be attached facing backwards or forwards, so the effective range is 45 degrees forward to 45 degrees backward. There are 3 pairs of holes for mounting bottle cages on the mast. Two pairs are down low (where you usually want your bottles to be) and one pair is higher. The higher pair is used to mount the second bottle cage on the acute (inside) angle side when the mast is angled all the way down to 45 degrees.\u003c\/p\u003e\n\u003cp\u003e3. Is it OK to carry other things on the mount?\u003c\/p\u003e\n\u003cp\u003eYes, as long as they aren't much heavier than a full water bottle. Things like Cage Rockets are a handy way to keep phones, energy bars, etc. close at hand. Also, there are six 5mm threaded holes on the mast you are free to attach things to. We may be offering a computer mounting stub, for instance.\u003c\/p\u003e\n\u003cp\u003e4. I notice it has a curved angle adjustment slot as well as 3 holes on the other side. Can I use the holes if I want?\u003c\/p\u003e\n\u003cp\u003eYes. The holes on the other side of the curved slot are presets at 45, 67.5, and 90 degrees. We don't expect many people will use them, but we put them there in case anyone ever wants them.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eTake a few moments to decide whether you would prefer your bottles to face forward or backward, then install the mount so the adjustment range is in that direction. Wrench access is easiest with the mast at 90 degrees, and without bottle cages installed, so we recommend you wait to attach the bottle cages and adjust the angle until after it's mounted.\u003c\/li\u003e\n\u003cli\u003eAfter it's mounted, attach the cages and adjust the angle. Adjust the angle and bottle height so you can easily reach them while you're riding, and they are not in the way getting on or off the seat.\u003c\/li\u003e\n\u003cli\u003eYou'll need a 3mm Allen wrench for the bolts, we supply stainless 5mm button socket bolts for everything.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e ADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv title=\"\" class=\"tabbertab\"\u003e\n\u003cul\u003e\n\u003cli\u003eMounts anyplace you can put a regular bottle cage. Holds 2 standard water bottle cages anywhere from 45 degrees to 90 degrees from the surface it's mounted on. Can be angled forward and back by reversing how it's attached.\u003c\/li\u003e\n\u003cli\u003eMade to hold 2 standard water bottle cages and designed to carry 2 water bottles worth of weight.\u003c\/li\u003e\n\u003cli\u003eBase is slotted to fit any bottle bosses in the standard bicycle range. 5mm threaded holes on the mast are centered on the standard. 3 pairs of holes are provided on the mast so you have both cage height options and to make sure there is clearance so your bottle won't touch your frame if it's on a cage on the acute (inside) angle side even if the mast is adjusted all the way down.\u003c\/li\u003e\n\u003cli\u003eCNC machined aluminum, black anodized and laser marked. We provide 5mm stainless button head bolts for both the frame attachment and the bottle cage attachments. We think the button heads look better and work better because the heads are wider and flatter. Wider works better on slotted things like bottle cages, and the flatter heads give more clearance so your bottles won't hit the bolt heads.\u003c\/li\u003e\n\u003cli\u003eFits any bike\/trike with standard bottle cage mounting bosses. This mount is most suitable for bikes and trikes where the existing bottle cage mount is basically horizontal, and you would prefer that it be more vertical. Can theoretically be attached to an add on (clamp on) mount, but the mount would need to be very strong if you want to run 2 bottles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"No Bottle Cages","offer_id":49313957183732,"sku":"ACM239.1","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Add 1x Aluminum Bottle Cage (Black)","offer_id":49313957216500,"sku":"ACM239.2","price":61.5,"currency_code":"USD","in_stock":true},{"title":"Add 2x Aluminum Bottle Cages (Black)","offer_id":49313957249268,"sku":"ACM239.3","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Adjustomatic_4.jpg?v=1788458181"},{"product_id":"bar-end-shifter-micro-mount","title":"Bar End Shifter Micro Mount","description":"\u003cp\u003e\"Well now, that's a clever little thing!\" We tend to hear that a lot about this little mount. It replaces the special bolt on the fixed (non lever) side of your bar end shifter and adds a nice little spot to attach smallish things like motor controls, cycle computers, and electronic shifter buttons. The outside diameter is 7\/8\" (22.2mm), so all kinds of standard bike things can go there. We make different versions for Shimano, Microshift, and SRAM shifters, because, of course, they are all different. We also make them in short and regular lengths, to match what you need to put there. They are machined from a solid bar and hollowed out for lightness and in case you wanted to put something in them. (Hint: our Handlebar Accessory Mount Clamps just happen to fit perfectly inside the Regular length). A plastic cap is included in case you only want to attach things on the outside.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"854\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/YsQUqcefqSs\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. Clever! How does it work?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eOn the Shimano and Microshift, this mount has a machined arm that exactly matches the shape of the special threaded nut (the long thin one with the two flats on it) that holds the shifter together. You simply unscrew the bolt through the shifter, slide the nut out, and slide in the Micro Mount. You don't even have to take the shifter apart, just unscrew the bolt, and while holding things in place, slide in the Micro Mount and tighten it. On SRAM shifters, you remove the tapered bolt and replace it with the Micro Mount. The new bolt inside the Micro Mount holds things together.\u003c\/p\u003e\n\u003cp\u003e2. Which side can I put it on?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe Micro Mounts can go on both front and rear bar end shifters. The important thing is that they need to go on the fixed side of the shifter (the side that has the arm coming up from where the shifter attaches down inside the handlebars). They can't attach to the side where the shifter arm itself is. We tried to figure out something that would work there, but we couldn't, the way the mechanisms work there was no way to do it. So, fixed side only it is.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cb\u003eA note to ICE trike riders: \u003c\/b\u003eICE generally mounts their bar end shifters so that you push forward for the lower gears, and pull back for the higher gears. This puts the fixed side (where the Micro Mounts need to go) on the OUTSIDE of your handlebars. Since your hands come up the outside of the handlebars to go from the brakes to the shifters and back, having the mount on the outside would be in the way. It would also put things like throttle controls on the outside where they aren't easy to operate with your thumb. The solution is simple- turn the shifters around. It'll take a short bit to get used to it, but like driving on the right vs the left, it will feel perfectly natural after a while.\u003c\/p\u003e\n\u003cp\u003e3. What can I put there?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003ePretty much any small thing made to mount to a handlebar. The Micro Mounts aren't very big (on purpose!) at either 15mm or 30mm long, but they are just right for thumb throttles, motor controller buttons, cycle computers, etc.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShort versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7\/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).\u003c\/li\u003e\n\u003cli\u003eFits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Standard (30mm) \/ SRAM","offer_id":49313957347572,"sku":"ACM377.1","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Standard (30mm) \/ Shimano","offer_id":49313957380340,"sku":"ACM377.2","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Standard (30mm) \/ MicroSHIFT","offer_id":49313957413108,"sku":"ACM377.3","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Short (15mm) \/ SRAM","offer_id":49313957445876,"sku":"ACM377.4","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Short (15mm) \/ Shimano","offer_id":49313957478644,"sku":"ACM377.5","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Short (15mm) \/ MicroSHIFT","offer_id":49313957511412,"sku":"ACM377.6","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/BESMMFam_2.png?v=1788458183"},{"product_id":"bar-end-shifter-mount","title":"Bar End Shifter Mount","description":"\u003cp\u003eEver wanted to attach a computer, GPS, motor controller, or phone right near your hands? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters, so there wasn't any way to do it? Well, now there is! This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp extends forward and inward a little bit, and holds the T-shaped mounting tube that goes up and over. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. It can be installed on the right or left side of the trike.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What does this mount do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eA lot of trikers would like to mount accessories near their hands. When you have Bar End Shifters, the ends of the handlebars are full and there's no place to put things. This mount solves that by providing a clamp with a notch in it to go around the shifter cable. We make two versions, one for when the cable is in the front, and one for when the cable is in the back.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eSince your hands need to move up and down from the brakes to the shifters and back, the clamp is angled and specially shaped to stay out of the way. It's curved and doesn't have any sharp corners, so as your fingers brush past it, you'll hardly notice it's there. The L shaped tubular mount goes up and out, putting an adjustable height horizontal tube about 2 inches (50mm) above and in front of the shifters. It works on both the left and right sides by simply flipping the components around.\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e2. What can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAll sorts of things- mirrors, computers, phones, GPSs, motor controllers, etc. Anything you want close at hand.\u003c\/p\u003e\n\u003cp\u003e3. Can I use it as a hand rest?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, it's strong enough to rest your hands for a while as you ride, but we don't recommend you use it to actively steer your trike. It's designed to be a lightweight accessory mount, not a handlebar extension.\u003c\/p\u003e\n\u003cp\u003e4. Can I use it as an exit assist?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. The handlebars themselves are often not strong enough, and the clamp is designed to be small and light and it's not strong enough to hold that much weight. We make actual exit assists as well, they are made very differently.\u003c\/p\u003e\n\u003cp\u003e5. How hard is it to install?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eNot hard at all. You don't have to decable the shifter, but you do have to move it up temporarily.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003eInstallation is straightforward but does involve popping the bar end shifter out temporarily. If you are unfamiliar with shifters or are uncomfortable taking things apart, we recommend finding someone to help you that's done things like this before. It's not hard, but there are some details you want to pay attention to. Installation goes like this: release the handlebar clamp inside the shifter, pull the shifter up, slide the clamp arm over the cable housing, push the clamp onto the end of the handlebar, and put the shifter back the way it was. Here are the detailed steps to install:\u003cspan\u003e \u003c\/span\u003e\n\u003col\u003e\n\u003cli\u003eWhile pedaling, shift into the gear where the lever is vertical. Then, without pedaling, shift so the lever is horizontal. This puts slack in the cable, which makes the shifter easier to take apart. \u003c\/li\u003e\n\u003cli\u003eExamine the shifter. One side of it rotates with the shifter arm, and the other side does not. There will be two bolts, one on each side. Remove the bolt from the fixed (non shifter arm) side. \u003c\/li\u003e\n\u003cli\u003eSwing the shift lever aside. You should now be able to see down inside the handlebar to the clamp that holds the shifter in place. Loosen the clamp bolt \u003cb\u003e1 (one!) turn.\u003c\/b\u003e This should be enough to release the clamp. You don't want to overloosen the clamp as the parts may fall down inside the handlebar. Just barely loose is all you need. \u003c\/li\u003e\n\u003cli\u003eGently pull the shifter base up out of the handlebar. The handlebar grip will be gripping the cable housing, but a slow steady pull will allow you to pull it up enough to get it out. Once it's out, there's no need to pull it any further. \u003c\/li\u003e\n\u003cli\u003eThere are two pinch bolts in the new clamp. They cross the long curved slot in the clamp. The cable housing needs to slide through that slot, so temporarily remove the bolts. \u003c\/li\u003e\n\u003cli\u003eOrient the clamp so the open end will point slightly inward towards the middle of the trike when the clamp is on the end of the handlebar. With the clamp in that orientation, slide the cable housing through the slot in the clamp, all the way to the inside where the cable tunnel is. \u003c\/li\u003e\n\u003cli\u003ePush the cable housing in to the tunnel and push the clamp down onto the end of the handlebar. Most handlebar grips will happily push down the 1\/2 inch (12.7mm) that the clamp requires. Push the clamp down until the end of the handlebar is flush with the top of the clamp. Reinstall the clamp bolts and lightly clamp it to the handlebar while you reinstall the shifter. \u003c\/li\u003e\n\u003cli\u003ePut the shifter clamp back into the end of the handlebar, and while gently pulling on the shifter cable, push the shifter base back into the handlebar until it seats. Align the shifter base so the swing of the shifter arm is where you want it and tighten the clamp bolt down inside the handlebar. \u003c\/li\u003e\n\u003cli\u003ePut the shifter arm back on the base. There is usually a square or D shaped protrusion on the arm that needs to go back into a corresponding pocket on the side of the base. Rotate the arm and snap it into the pocket. Reinstall the bolt that holds the arm to the base. Pull the shifter arm back to vertical to retension the cable. \u003c\/li\u003e\n\u003cli\u003eLoosen the bolts on the new clamp and install the L arm. Adjust the height and angle of the arm and the clamp, then tighten the clamp bolts. Once they take tension, tighten them alternately until they are both medium tight.\u003c\/li\u003e\n\u003c\/ol\u003e\nAll Done! Now, mount whatever you'd like!\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"tabbertab\" title=\"\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from 6061T6 aluminum, anodized black. Fasteners are stainless steel. Clamp attaches the end of your 7\/8 handlebar and has a tunnel that goes around the shifter cable. The L shaped Accessory Mounting tube provided is black powder coated 7\/8 diameter 6061T4 tube.\u003c\/li\u003e\n\u003cli\u003eThere are two versions of the clamp part of this mount. One has the cable tunnel on the front (most trikes, like Catrike, TerraTrike, HPVT, Azub, Performer, etc.), and the other has the cable tunnel on the back (ICE trikes assembled in the UK).\u003c\/li\u003e\n\u003cli\u003eThe clamp is designed to be installed without needing to decable the shifter. Once you've done one, you can install one in about 2 minutes. It's one of those things that's more work to explain than to do.\u003c\/li\u003e\n\u003cli\u003eThe clamp is designed to clamp around a painted or anodized 7\/8 inch (22.2mm) handlebar tube. Only 1\/2 inch (12.7mm) of handlebar space is required. The width of the cable tunnel allows about 10 degrees of side to side angular adjustment.\u003c\/li\u003e\n\u003cli\u003eThe T shaped Accessory Mounting Tube is also 7\/8 inch in diameter and has a total height of about 5 inches (127mm). The Accessory Mounting tube is adjustable up and down and radially.\u003c\/li\u003e\n\u003cli\u003eThis mount is designed to hold accessories like mirrors, phones, GPSs, and motor controllers. It is not designed for heavy loads or to carry steering forces.\u003c\/li\u003e\n\u003cli\u003eFits any bike or trike with bar end shifters where you'd like to mount other things near the end of the handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Cable in Front (Most Catrike, HP, Azub, etc.) \/ Yes include 4 x 5 T-Tube","offer_id":49313957937396,"sku":"ACM338.1","price":72.0,"currency_code":"USD","in_stock":true},{"title":"Cable in Front (Most Catrike, HP, Azub, etc.) \/ No do not include 4 x 5 T-Tube","offer_id":49313957970164,"sku":"ACM338.3","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Cable in Back (Some ICE) \/ Yes include 4 x 5 T-Tube","offer_id":49313958002932,"sku":"ACM338.2","price":72.0,"currency_code":"USD","in_stock":true},{"title":"Cable in Back (Some ICE) \/ No do not include 4 x 5 T-Tube","offer_id":49313958035700,"sku":"ACM338.4","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/BESM3copy.jpg?v=1788458183"},{"product_id":"mini-cockpit-t","title":"Cockpit Mini T","description":"\u003cp\u003eThis Cockpit Mini T plugs in and clamps on to the end of your handlebar, allowing you to mount accessories and more!\u003c\/p\u003e\n\u003cp\u003eThe cable hole is great for e-assist displays that mount on the handlebars!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4YFIGvMZbUA\" height=\"480\" width=\"854\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eBig thanks to Ja Yoe for the videos. Visit \u003ca rel=\"noopener noreferrer\" href=\"http:\/\/jayoe.com\/\" target=\"_blank\"\u003eJaYoe.com\u003c\/a\u003e to keep up with his travels. Note that the wrist rest shown attached to our Mini-T in Matt's video is an HP Velotechnik item.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. How does it work?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe vertical part of the T fits down inside the end of the handlebar. A clamp goes down over the end of the handlebar and holds them together.\u003c\/p\u003e\n\u003cp\u003e2. Will it fit in my handlebar?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAlmost certainly. Any handlebar that can take bar end shifters can take this mount.\u003c\/p\u003e\n\u003cp\u003e3. What can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAll sorts of things- phones, computers, GPSs, mirrors, horns... or leave it free and use it as a hand rest or assist grip. It's quite useful. We don't recommend you put things like brakes and shifters on it though, it's made for being a rest and for mounting accessories.\u003c\/p\u003e\n\u003cp\u003e4. Can I use it with my bar end shifters?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eNo, we have another mount for that, our Bar End Shifter Mounts. They use a special clamp with a tunnel for the bar end shifter cable. You can also use our Cockpit Mounts, they go almost anywhere and work with bar end shifters.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eCut off the end of the handlebar grip so 3\/8 inch (10mm) of bare handlebar end is showing. This is fairly easily done if you wrap masking tape around the grip and cut along the line using a sharp knife.\u003c\/p\u003e\n\u003cp\u003eInsert the short end of the T down into the handlebar. It needs to go in about 1.5 inches (38mm). Push the clamp down so it is seated on the top of the handlebar (sight through the hole in the clamp to see where the edge of the handlebar is). Align the T where you want it, and tighten both clamp bolts.\u003c\/p\u003e\n\u003cp\u003eYou can mount things inside the horizontal tube by removing the end caps.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits into any handlebar that can take bar end shifters (bars with 3\/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T.\u003c\/li\u003e\n\u003cli\u003eDiameter of the horizontal portion is 7\/8 inch (22.2mm), the same as a standard handlebar, so all kinds of things can be attached. We do not recommend that you attach controls like shifters and brakes, however.\u003c\/li\u003e\n\u003cli\u003eNote that if you have Bar End Shifters, the ends of your bars already have something in them. We have a different mount if so, our Bar End Shifter Mounts. They use a special clamp with a tunnel for the bar end shifter cable. You can also use our Cockpit Mounts, they go almost anywhere and work with bar end shifters.\u003c\/li\u003e\n\u003cli\u003e4 inches (100mm) wide and 3 inches (75mm) tall. Requires 1.5 inch (38mm) of insertion into the handlebar for a net height above the end of the handlebar of 1.5 inches (38mm). Requires 3\/8 inch (10mm) of clear handlebar end to clamp onto. Made from black powder coated aluminum.\u003c\/li\u003e\n\u003cli\u003eFits any bike or trike with 7\/8 inch outside diameter and 3\/4 inch inside diameter handlebars (almost all underseat handlebars are made this way).\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"3.75in with No Cable Hole","offer_id":49313961378036,"sku":"ACM240.1","price":64.0,"currency_code":"USD","in_stock":true},{"title":"5in with Cable Hole","offer_id":49313961410804,"sku":"ACM240.2","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Untitled-4_02c0e32d-541a-4edb-9882-15ae44da01e9.png?v=1788458184"},{"product_id":"multipurpose-accessory-mount","title":"Multi-Purpose Accessory Mount","description":"\u003cp\u003eBeautiful. Durable. Functional. If you don't have one, the Multi-Purpose Accessory Mount is the best thing that hasn't happened to your bike. But chances are this isn't your first time here, because few people buy just one. We don't condone it, but this lightweight mount is so strong, you can lift your bike by it. What's amazing, though, is that with its dual pivoting legs that come in three sizes, it can mount anywhere. Seriously. Add one or two Extender Kits and you'll suddenly find yourself with more room than you know what to do with! The triangulating legs cut out the shaking that flimsier mounts create, and allows for insane versatility.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_Ioj5UADyD8\" height=\"480\" width=\"854\" allowfullscreen=\"\" allow=\"autoplay; encrypted-media\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eBig thanks to Ja Yoe for the videos. Visit \u003ca href=\"http:\/\/jayoe.com\/\" target=\"_blank\" rel=\"noopener\"\u003eJaYoe.com\u003c\/a\u003e to keep up with his travels.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. How do I know if an Accessory Mount will work on my bike?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAs long as you have a round or nearly round tube to attach to that is less than 1-1\/4in (31.8mm) you should be able to attach an Accessory Mount to it. You will need two points of attachment, one for each leg of the mount. The two points don't have to be on the same tube, and the distance between the two points can vary quite a bit. Most people put their mounts on the same tube with the mounting points 2-3 inches (5-8cm) apart. Depending on the particular situation and the things you have to work around, all kinds of things are possible.\u003c\/p\u003e\n\u003cp\u003e2. How easy is it to install?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIf you are just attaching it to a single, unobstructed tube, it's super simple. We use Cateye brand plastic band clamps for attachment. We modify them to add a metal bushing to move the mounting point out to half the width of the Accessory Mount's mid tube. You simply snap the Cateye clamps around the tube on your bike and attach the ends of the Accessory Mount arms to the Cateye clamps. If there are things in the way, you can adjust the arms on the Accessory Mount to work around them.\u003c\/p\u003e\n\u003cp\u003e3. How strong are they?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003ePretty strong. You could probably pick your bike up with them. The real question is \"How much weight can they take?\". They can easily take a light, or a GPS, or a phone, or a mirror. They can take two lights as long as they aren't both big heavy ones with giant batteries inside. The Accessory Mount arms form a triangle with the tube they are mounted on. The base of the triangle determines the stiffness. As long as the ends of the arms aren't super close together (less than an inch and a half, or 4cm or so), the triangle will be very stiff.\u003c\/p\u003e\n\u003cp\u003e4. What size range of tube can I attach to?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eCateye clamps come in sizes from 1\/2 inch (12mm) to 1-1\/4 inch (31.8mm) in 1\/8 inch (3mm) increments. They come with shims to let you fine tune the fit within that range. To clamp to things smaller than 1\/2 inch, we recommend using a rubber shim. McMaster-Carr sells thick wall rubber tubes with 1 inch outer diameters and inner diameters down to 1\/4 inch (1cm). A short section of material like this, sliced into a C shape, works great. We keep several sizes of this material in stock and can cut shims for a nominal fee.\u003c\/p\u003e\n\u003cp\u003e5. Can I attach to things that are not round?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt depends. The Cateye clamps can handle some ovalization, to around a 2 to 3 ratio of width to depth. You can sometimes use a larger clamp and shim the thinner part of the oval. It is also possible to attach the ends of the Accessory Mount arms to something else- a bottle boss, a brake boss, all kinds of things. There are also other clamps that may handle strongly oval tubes better, like P clips, though they aren't as stable as the Cateye clamps.\u003c\/p\u003e\n\u003cp\u003e6. Can I get a wider tube across the middle?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eI want to attach lots of stuff. The tube across the middle is 30mm wide. We have 15mm extensions that can be added to the outside of the mount. It is possible to replace the tube in the middle with something wider, but all the widths of everything else also change. It's been done, and with good results, but it takes a bit of fiddling to do it. The extensions are very easy.\u003c\/p\u003e\n\u003cp\u003e7. Can I mount my European light that's designed to attach to a tab with a horizontal hole?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, we make a tab style mount that goes on the end of the Accessory Mount. You can add up to two.\u003c\/p\u003e\n\u003cp\u003e8. Which arms do I need?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor most recumbent applications, we recommend the 50x75mm or 75x100 arm combinations. The different length arms give a lot of versatility. If you want more room, or to get things further away from the frame, go for the 75x100mm version. On upright bicycle stem mounting applications, we recommend the 75x100mm or 100x100mm arm combinations for maximum range. If you are mounting on a fork blade, we recommend the 50x75mm setup. For some Highracer Recumbents, the 100x100mm combination allows you to put a light down low and right in front of the BB shell.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAccessory Mount arm lengths are 50mm, 75mm, and 100mm. We normally sell them in the most common configurations, but can make different combinations on request. The mounting tube in the middle is 1 inch (25.4mm) in diameter. Nearly all bicycle accessories will work on a 1 inch tube.\u003c\/li\u003e\n\u003cli\u003eA pair of Cateye clamps is included.\u003c\/li\u003e\n\u003cli\u003eWe make 90 degree adapters that can either be used directly with the Accessory Mount (to attach to bottle mounts, for example) or to be inserted into Cateye clamps to attach the Accessory Mount to a parallel tube, for things like putting an Accessory Mount out in front of your handlebars.\u003c\/li\u003e\n\u003cli\u003eAccessory Mounts can also be attached to things other than Cateye clamps. The holes in the ends of the Accessory Mount arms take 5mm bolts. Anyplace you can attach a 5mm bolt, you can attach an Accessory Mount.\u003c\/li\u003e\n\u003cli\u003eThe arms are curved to let you work them around obstacles. The arms are reversible, so you can make them curve up or curve down, as needed.\u003c\/li\u003e\n\u003cli\u003eThe tube across the middle where you put your lights, computer, GPS, or whatever, is 25.4mm (1 inch) in diameter and 30mm wide, which is ideal for most accessories. The tube has two O-Ring grooves in it, so you don't have to worry about your expensive light or GPS slipping off.\u003c\/li\u003e\n\u003cli\u003eWe make side extender tubes and tab mounts for Euro style lights if you need more mounting options.\u003c\/li\u003e\n\u003cli\u003eOur good friend, John Spurgeon, who became the first person in history to complete Race Across America on a single-speed upright bike, exclusively used T-Cycle accessory mounts because he trusted their ultimate function and durability. He reported no problems whatsoever and continues to use the mounts on his bikes for commuting and training. Several other RAAM teams have used Accessory Mounts as well.\u003c\/li\u003e\n\u003cli\u003eA note on arm lengths: For most recumbent applications, we recommend the 50x75mm or 75x100 arm combinations. The different length arms give a lot of versatility. If you want more room, or to get things further away from the frame, go for the 75x100mm version. On upright bicycle stem mounting applications, we recommend the 75x100mm or 100x100mm arm combinations for maximum range. If you are mounting on a fork blade, we recommend the 50x75mm setup. For some Highracer Recumbents, the 100x100mm combination allows you to put a light down low and right in front of the BB shell.\u003c\/li\u003e\n\u003cli\u003eAccessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The Cateye clamps are non scratch plastic. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1\/8 (28.6mm) tube (a common mast and derailleur post size).\u003c\/li\u003e\n\u003cli\u003eA note on amazing lightweightness: the 50x75mm mount is only 53 grams.\u003c\/li\u003e\n\u003cli\u003eAccessory Mounts pretty much fit somewhere on everything. Really, it's great fun seeing how creative people get with these. It's not uncommon for people to order one, then come back later and order several more when they realize the things they can do with them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"50mm x 75mm \/ 1\/2in \/ No Extender","offer_id":49313961443572,"sku":"ACM031.1","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1\/2in \/ Additional Extender","offer_id":49313961476340,"sku":"ACM031.2","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 5\/8in \/ No Extender","offer_id":49313961509108,"sku":"ACM031.4","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 5\/8in \/ Additional Extender","offer_id":49313961541876,"sku":"ACM031.5","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 3\/4in \/ No Extender","offer_id":49313961574644,"sku":"ACM031.7","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 3\/4in \/ Additional Extender","offer_id":49313961607412,"sku":"ACM031.8","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 7\/8in \/ No Extender","offer_id":49313961640180,"sku":"ACM031.10","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 7\/8in \/ Additional Extender","offer_id":49313961672948,"sku":"ACM031.11","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1in \/ No Extender","offer_id":49313961705716,"sku":"ACM031.13","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1in \/ Additional Extender","offer_id":49313961738484,"sku":"ACM031.14","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1-1\/8in \/ No Extender","offer_id":49313961771252,"sku":"ACM031.16","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1-1\/8in \/ Additional Extender","offer_id":49313961804020,"sku":"ACM031.17","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1-1\/4in \/ No Extender","offer_id":49313961836788,"sku":"ACM031.19","price":63.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 1-1\/4in \/ Additional Extender","offer_id":49313961869556,"sku":"ACM031.20","price":77.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 90° Adapters \/ No Extender","offer_id":49313961902324,"sku":"ACM031.22","price":78.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ 90° Adapters \/ Additional Extender","offer_id":49313961935092,"sku":"ACM031.23","price":90.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ No Clamps \/ No Extender","offer_id":49313961967860,"sku":"ACM031.25","price":55.0,"currency_code":"USD","in_stock":true},{"title":"50mm x 75mm \/ No Clamps \/ Additional Extender","offer_id":49313962000628,"sku":"ACM031.26","price":69.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1\/2in \/ No Extender","offer_id":49313962033396,"sku":"ACM031.28","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1\/2in \/ Additional Extender","offer_id":49313962066164,"sku":"ACM031.29","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 5\/8in \/ No Extender","offer_id":49313962098932,"sku":"ACM031.31","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 5\/8in \/ Additional Extender","offer_id":49313962131700,"sku":"ACM031.32","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 3\/4in \/ No Extender","offer_id":49313962164468,"sku":"ACM031.34","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 3\/4in \/ Additional Extender","offer_id":49313962197236,"sku":"ACM031.35","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 7\/8in \/ No Extender","offer_id":49313962230004,"sku":"ACM031.37","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 7\/8in \/ Additional Extender","offer_id":49313962262772,"sku":"ACM031.38","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1in \/ No Extender","offer_id":49313962295540,"sku":"ACM031.40","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1in \/ Additional Extender","offer_id":49313962328308,"sku":"ACM031.41","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1-1\/8in \/ No Extender","offer_id":49313962361076,"sku":"ACM031.43","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1-1\/8in \/ Additional Extender","offer_id":49313962393844,"sku":"ACM031.44","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1-1\/4in \/ No Extender","offer_id":49313962426612,"sku":"ACM031.46","price":63.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 1-1\/4in \/ Additional Extender","offer_id":49313962459380,"sku":"ACM031.47","price":77.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 90° Adapters \/ No Extender","offer_id":49313962492148,"sku":"ACM031.49","price":78.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ 90° Adapters \/ Additional Extender","offer_id":49313962524916,"sku":"ACM031.50","price":90.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ No Clamps \/ No Extender","offer_id":49313962557684,"sku":"ACM031.52","price":55.0,"currency_code":"USD","in_stock":true},{"title":"75mm x 100mm \/ No Clamps \/ Additional Extender","offer_id":49313962590452,"sku":"ACM031.53","price":69.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1\/2in \/ No Extender","offer_id":49313962623220,"sku":"ACM031.55","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1\/2in \/ Additional Extender","offer_id":49313962655988,"sku":"ACM031.56","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 5\/8in \/ No Extender","offer_id":49313962688756,"sku":"ACM031.58","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 5\/8in \/ Additional Extender","offer_id":49313962721524,"sku":"ACM031.59","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 3\/4in \/ No Extender","offer_id":49313962754292,"sku":"ACM031.61","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 3\/4in \/ Additional Extender","offer_id":49313962787060,"sku":"ACM031.62","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 7\/8in \/ No Extender","offer_id":49313962819828,"sku":"ACM031.64","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 7\/8in \/ Additional Extender","offer_id":49313962852596,"sku":"ACM031.65","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1in \/ No Extender","offer_id":49313962885364,"sku":"ACM031.67","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1in \/ Additional Extender","offer_id":49313962918132,"sku":"ACM031.68","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1-1\/8in \/ No Extender","offer_id":49313962950900,"sku":"ACM031.70","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1-1\/8in \/ Additional Extender","offer_id":49313962983668,"sku":"ACM031.71","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1-1\/4in \/ No Extender","offer_id":49313963016436,"sku":"ACM031.73","price":63.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 1-1\/4in \/ Additional Extender","offer_id":49313963049204,"sku":"ACM031.74","price":77.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 90° Adapters \/ No Extender","offer_id":49313963081972,"sku":"ACM031.76","price":78.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ 90° Adapters \/ Additional Extender","offer_id":49313963114740,"sku":"ACM031.77","price":90.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ No Clamps \/ No Extender","offer_id":49313963147508,"sku":"ACM031.79","price":55.0,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm \/ No Clamps \/ Additional Extender","offer_id":49313963180276,"sku":"ACM031.80","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Multi_Purp_Fam_6.jpg?v=1788458185"},{"product_id":"cockpit-mount-horizontal-attachment","title":"Cockpit Mount (Horizontal Attachment)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cem\u003e\u003cstrong\u003eCockpit Mounts are plenty strong for holding accessories, but they are NOT strong enough to serve as an exit assist.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cockpit Mount with Horizontal Attachment allows you to position cockpit mounts anywhere and everywhere on a steering arm. With two Double-Ended Clamps, a 90-Degree Elbow Tube, and a 5\" x 9\" Asymmetric T-Bar, forward\/backward, left\/right, and up\/down, transform from obstacles to options! Made for attachment to horizontal direct steer tubes (like Catrike), the Cockpit Mount with Horizontal Attachment lets you put everything in the ideal position. For you BROLers out there, check out Bryan Ball's opinion by \u003ca href=\"http:\/\/www.bentrideronline.com\/messageboard\/showthread.php?t=102075\" target=\"_blank\" rel=\"noopener\"\u003eclicking here\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What is this exactly?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe Cockpit Mount system is based on a versatile set of clamps and articulating links, designed to be very adjustable. The top of the Cockpit Mount where you put your accessories is a generous 5 inches (12.5cm) wide - room for all sorts of things like GPS, phone, or mirror! Cockpit Mounts have 7\/8 inch (22.2mm) diameter tubes, which is the standard handlebar size, so things made to go on handlebars will go right on a Cockpit Mount.\u003c\/p\u003e\n\u003cp\u003e2. How do you install it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eSpecial clamps make everything easy. First, you decide where you'd like your accessories to be. Then, you adjust the mounting system to hold things there. The clamps are designed to attach to round tubes that are either 7\/8 inch or 1 inch in diameter (be sure to check this option). This version of the kit, the Horizontal Mount Cockpit Mount, is made to attach to a horizontal tube, as is found on direct steer recumbent trikes like Catrike and Actionbent. We make a another version designed to be attached to vertically oriented tubes (a very common choice). The clamps are designed so they open up and clamp around whatever spot you have open. There is no need to remove anything that is already on your handlebars or whatever tube you are attaching to.\u003c\/p\u003e\n\u003cp\u003e3. How strong are they? What can you put on them?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eStrong. You could probably pick your bike up with them. They can easily take a GPS, phone, mirror, even water bottles. There is enough room you can usually get two or three things on them if you wish.\u003c\/p\u003e\n\u003cp\u003e4. What size range of tube can I attach to?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe make clamps for attaching to either 1 inch 7\/8 inch tubes. Catrikes have 1 inch horizontal direct steer tubes. Actionbent uses 7\/8 inch horizontal tubes.\u003c\/p\u003e\n\u003cp\u003e5. Can I attach to things that are not round?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. It's important that the tube you attach to is straight and round where the clamp attaches. The clamp is 1\/2 inch (12m) wide, so this is usually pretty easy to do.\u003c\/p\u003e\n\u003cp\u003e6. Can I get a wider tube at the top?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eI want to attach lots of stuff. The T shaped mounting tube has a 5 inch side and a 9 inch (23cm) side. You are free to use either part of the T. The T is asymmetric, so you can reverse it if you want to move things in or out.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv title=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eSuper stiff for extra stability - hold things like cycle computers, mirrors, GPS units, cameras, and phones close at hand, right where you want them. \u003c\/li\u003e\n\u003cli\u003e5in (125mm) wide T-Bar for accessories\u003c\/li\u003e\n\u003cli\u003eQuick attach open ended mounts- no need to remove anything first.\u003c\/li\u003e\n\u003cli\u003eSuper stiff for extra stability- great for mirrors and cameras.\u003c\/li\u003e\n\u003cli\u003eA special double ended clamp attaches to an existing tube, often your handlebars, but in this case, your direct steer horizontal tube. Since the clamp is open ended, it’s easy to install, even with everything else already there. Another double ended clamp holds a T bar for your accessories. The two clamps are joined in the middle by a third L shaped tube. The third tube in the middle lets you articulate the mount, much like your elbow allows you to move your arm in and out and swing it around. \u003c\/li\u003e\n\u003cli\u003eYou simply install the mount, move things around to where they need to be, and lock the clamps. The clamps lock tight enough you can easily pick up your bike or trike by the T bar. \u003c\/li\u003e\n\u003cli\u003eCockpit Mounts are available as kits and as individual pieces. We are starting out with two kits, one that's a Indirect Steer Horizontal Attach Kit designed for Catrikes and other Direct steered trikes. In individual parts, there are two types of clamps, two types of articulation tubes, and a T bar that’s asymmetric to maximize positioning options. We will be introducing additional clamps and other system parts in the coming months. The idea is to create a versatile, mix and match system for attaching whatever you need, wherever you need.\u003c\/li\u003e\n\u003cli\u003eThis Cockpit Mount Kit is designed to attach to a 1.0in (25.4mm) Horizontal Tube, as found on Catrikes, or a 7\/8 tube, as found on some other direct steered trikes. \u003c\/li\u003e\n\u003cli\u003eA 90 degree elbow tube allows you to rotate the attachment clamp up or down on the horizontal steering arm. The 5in (125mm) wide T Bar attaches to the other side of the elbow tube. You can rotate the T Bar around on the vertical part of the elbow in order to move the T bar in and out. \u003c\/li\u003e\n\u003cli\u003eYou can position the Cockpit mount anywhere forward and back on the steering arm that you would like. Most people like their Cockpit Mount either close to their controls or further forward near the head tube. When the T Bar is close to the head tube, it will only move in a small arc as you steer. This is a good place for a mirror, because the mirror won't move very much as you turn. \u003c\/li\u003e\n\u003cli\u003eBy putting the right amount of tension on the clamps, you'll find it's very easy to move things around and find the ideal position for everything. Once you've determined your ideal position, just tighten the clamps to lock everything in place. \u003c\/li\u003e\n\u003cli\u003eThe T Bar is 7\/8in diameter, so anything that's made to attach to a handlebar will be happy there. To attach a mirror inside the T Bar, simply remove one end cap and install the mirror as if it were on the end of a regular handlebar. \u003c\/li\u003e\n\u003cli\u003eIf you have a direct steered trike with a less than 1 inch horizontal steering arm (early Actionbent, for example), we can substitute a 7\/8in (22.2mm) clamp. At the current time, we only have clamps for 1.0in or 7\/8in tubes. \u003c\/li\u003e\n\u003cli\u003eThe clamps are machined from 6061-T6 Aluminum and black anodized. The tubes are 6061-T6 seamless aluminum, welded and powder coated.\u003c\/li\u003e\n\u003cli\u003eNote that while Cockpit Mounts are plenty strong for holding accessories, they are not strong enough to serve as an exit assist.\u003c\/li\u003e\n\u003cli\u003eWeight: 8oz\u003c\/li\u003e\n\u003cli\u003eThis horizontally attaching version of the Cockpit Mount system is usually used with direct steer recumbent trikes, but there are lots of other places it will work. We make a different version for attaching to vertically oriented tubes, intended for the upward portions of recumbent underseat handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"7\/8in","offer_id":49313963344116,"sku":"ACM037.1","price":148.0,"currency_code":"USD","in_stock":true},{"title":"1in","offer_id":49313963376884,"sku":"ACM037.2","price":148.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/Cockpit_Mount-_Horizontal_3.png?v=1788458185"},{"product_id":"seat-strut-clamps","title":"Seat Strut Clamps (pair)","description":"\u003cp\u003eSeat Strut Clamps work hard to bring your bike several benefits so that you can sit back and enjoy! Many people get them just for the peace and quiet they provide, but the greatest advantage to Seat Strut Clamps is the dramatically stiffer seat support. Since there's no play in the tubes after you've installed these clamps, the back of your seat will be much stiffer, improving your bike's handling and often noticeably improving your pedal efficiency at the same time!\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. Can I use them on my bike? I don't think my tubes have slots, they just have holes for the adjuster pin.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThese clamps are designed for use without clamping slots. Each clamp has two collar clamps built into one unit. One of the collar clamps is sized for the outer tube, and the other collar clamp is sized for the inner tube. The outer tube does not have to be squeezed down to grip the inner tube; the inner tube is independently gripped by it's own clamp.\u003c\/p\u003e\n\u003cp\u003e2. I'm a big rider; are these strong enough?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, no problem there. These clamps grip really well.\u003c\/p\u003e\n\u003cp\u003e3. If clamps are such a good idea, why don't manufacturers use them?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eTradition, and cost. And, some manufacturers do use them, on their high end bikes.\u003c\/p\u003e\n\u003cp\u003e4. Are they sold one at a time, or in pairs?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIn pairs. It's the only reasonable way to do it.\u003c\/p\u003e\n\u003cp\u003e5. How do I know which one to order?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt's important to know what tubing sizes you have. This isn't too difficult, as the sizes go up in steps of 1\/8 inch. If you can accurately measure or guess the size of one tube, you can figure out the other one (it will be 1\/8 inch bigger or smaller).\u003c\/p\u003e\n\u003cp\u003e6. Can I use them for anything else?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAny place you want to clamp two telescoping tubes together. We've used them on a garden tool to turn a fixed handle into an extension handle, and it worked great! In particular, the 3\/4 inch into 7\/8 inch tube combination opens up some interesting possibilities in attaching accessories to handlebars, since handlebars are 7\/8 inch at the ends.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eA 3mm Allen wrench is required to operate the clamp bolts. Operation and use of the clamps is very simple:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSlip the larger end of the clamp over the large tube and lock it on.\u003c\/li\u003e\n\u003cli\u003eSlip the smaller tube into the larger tube, then lock it in. It is recommended that you ensure that at the smaller tube is inserted at least 2 diameters into the larger tube. This is comparable to or possibly smaller than the minimum insertion requirement on the grenade pins.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTo remove and replace the seat easily:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLoosen the bolt on the larger tube 1 full turn.\u003c\/li\u003e\n\u003cli\u003eSlide the smaller tube out of the larger tube, with the clamp still in place on the smaller tube.\u003c\/li\u003e\n\u003cli\u003eWhen you want to reassemble things, simply slide the smaller tube into the larger tube until the clamp is seated around the larger tube again. Retighten the clamp to the larger tube. Everything is back to where it was.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThese clamps are a great replacement for the “grenade pin” style seat stay adjustment found on many recumbents. They let you clamp together two telescoping tubes at whatever length you’d like. The tubes don’t need slots or any other special preparation. Simply slide the clamp over the larger tube, lock it on, slide the smaller tube inside, and lock it in, too. There are two separate clamps, one for each tube, built into one handy unit.\u003c\/li\u003e\n\u003cli\u003eIf you’ve ever lost a grenade pin, you know how frustrating it can be to find something to put in there to get you home. You can kiss that worry goodbye. And if you’ve ever wondered if your seat would be a little more comfortable if you could just move it a little bit, but the spacing between the grenade pin holes is a little much, or you’ve run out of holes, well, that’s gone too. You can set your seat position to wherever you want it in as fine an increment as you’d like.\u003c\/li\u003e\n\u003cli\u003eThese clamps slide on, then lock each tube independently. There are separate locking bolts, one for each tube. The tubes don’t need clamping slots or any other changes. You can adjust your seat wherever you want it in as fine an increment as you’d like. If you ever take your seat off, it will automatically go back to exactly where it was, because the clamps can stay in place on the smaller tube.\u003c\/li\u003e\n\u003cli\u003eSince the clamps lock the tubes completely, the back of the seat becomes much more rigid. This improves comfort, handling, and pedaling efficiency, all at the same time.\u003c\/li\u003e\n\u003cli\u003eThere are three sizes of clamps:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eOne fits sets of tubes that are 1\/2 and 5\/8in (12,7 and 15,9mm) diameter (Bacchetta, Burley, Sun, Longbikes, some older Rans models)\u003c\/li\u003e\n\u003cli\u003eThe next size up fits tubes that are 5\/8 and 3\/4in (15,9 and 19mm) diameter (Newer Rans models, WizWheelz\/TerraTrike pre 2012 models, and Barcrofts).\u003c\/li\u003e\n\u003cli\u003eThe largest and newest sized clamps are 3\/4\" x 7\/8\" (19mm and 22 mm) fit the 2012 and newer TerraTrikes and other larger rear strut machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eSold in pairs as a left and right set.\u003c\/li\u003e\n\u003cli\u003eWeight: 16 grams.\u003c\/li\u003e\n\u003cli\u003eAvailable in Black Only.\u003c\/li\u003e\n\u003cli\u003eThese clamps are compatible with any bike that uses telescoping tubes that are either 1\/2 to 5\/8 inch, 5\/8 to 3\/4 inch, or 3\/4 to 7\/8 inch. \u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBikes\/Trikes with 1\/2 into 5\/8 Tubes: Bacchetta, Burley, Sun, Longbikes, some older Rans models \u003c\/li\u003e\n\u003cli\u003eBikes\/Trikes with 5\/8 into 3\/4 Tubes: Newer Rans models, WizWheelz\/TerraTrike pre 2012 models, and Barcrofts \u003c\/li\u003e\n\u003cli\u003eBikes\/Trikes with 3\/4 into 7\/8 Tubes: 2012 and newer TerraTrikes and other larger rear strut machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eIt does not matter whether the larger or smaller tube is on the top or the bottom. The clamps work either way.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1\/2in-5\/8in","offer_id":49313965048052,"sku":"VGC103.1","price":56.0,"currency_code":"USD","in_stock":true},{"title":"5\/8in-3\/4in","offer_id":49313965080820,"sku":"VGC103.2","price":56.0,"currency_code":"USD","in_stock":true},{"title":"3\/4in-7\/8in","offer_id":49313965113588,"sku":"VGC103.3","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/VGC103.jpg?v=1788458186"},{"product_id":"cockpit-mount-vertical-attachment","title":"Cockpit Mount (Vertical Attachment)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cem\u003e\u003cstrong\u003eCockpit Mounts are plenty strong for holding accessories, but they are NOT strong enough to serve as an exit assist.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cockpit Mount with Vertical Attachment allows you to position cockpit mounts anywhere and everywhere in your cockpit. With two Double-Ended Clamps, a 40mm Straight Link Tube, and a 5\" x 9\" Asymmetric T-Bar, forward\/backward, left\/right, and up\/down, transform from obstacles to options! Made for attachment to vertically oriented handlebars (like most trikes and USS recumbents), the Cockpit Mount with Vertical Attachment lets you put everything in the ideal position.\u003c\/p\u003e\n\u003cp\u003eFor you BROLers out there, check out Bryan Ball's opinion by \u003ca href=\"http:\/\/www.bentrideronline.com\/messageboard\/showthread.php?t=102075\" target=\"_blank\" rel=\"noopener\"\u003eclicking here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/EM3blFIFGKg\" height=\"480\" width=\"854\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What is this exactly?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eCockpit Mounts have 7\/8 inch (22.2mm) diameter tubes that are designed to be attached on or around your handlebars to put things like computers, phones, and GPSs where you can reach them and more easily see them. 7\/8 inch is the standard handlebar size, so things made to go on handlebars will go right on a Cockpit Mount. The Cockpit Mount system is based on a versatile set of clamps and articulating links. They are designed to be very adjustable and to work around objects that might be in the way. The top of the Cockpit Mount where you put your accessories is a generous 5 inches (12.5cm) wide- room for all sorts of things.\u003c\/p\u003e\n\u003cp\u003e2. How do you install it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eSpecial clamps make everything easy. First, you decide where you'd like your accessories to be. Then, you adjust the mounting system to hold things there. The clamps are designed to attach to round tubes that are either 7\/8 inch or 1 inch in diameter (be sure to check this option). This version of the kit, the Cockpit Mount with Vertical Attachment, is made to attach to a vertically oriented tube, such as the upward pointing portion of your handlebars. Generally you attach them below where the brakes attach, but we also make a another version designed to be attached to horizontally oriented tubes. The clamps are designed so they open up and clamp around whatever spot you have open. There is no need to remove anything that is already on your handlebars or whatever tube you are attaching to.\u003c\/p\u003e\n\u003cp\u003e3. How strong are they? What can you put on them?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eStrong. You could probably pick your bike up with them. They can easily take a GPS, phone, mirror, even water bottles. There is enough room you can usually get two or three things on them if you wish.\u003c\/p\u003e\n\u003cp\u003e4. What size range of tube can I attach to?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe make clamps for attaching to either 1 inch 7\/8 inch tubes. Nearly all vertically oriented tubes will be 7\/8 inch.\u003c\/p\u003e\n\u003cp\u003e5. Can I attach to things that are not round?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. It's important that the tube you attach to is straight and round where the clamp attaches. The clamp is 1\/2 inch (12m) wide, so this is usually pretty easy to do.\u003c\/p\u003e\n\u003cp\u003e6. Can I get a wider tube at the top?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eI want to attach lots of stuff. The T shaped mounting tube has a 5 inch side and a 9 inch (23cm) side. You are free to use either part of the T. The T is asymmetric, so you can reverse it if you want to move things in or out.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuper stiff for extra stability - hold things like cycle computers, mirrors, GPS units, cameras, and phones close at hand, right where you want them. \u003c\/li\u003e\n\u003cli\u003e5in (125mm) wide T-Bar for accessories\u003c\/li\u003e\n\u003cli\u003eUnique articulated mounting system lets you work around obstacles and put things right where you want them.\u003c\/li\u003e\n\u003cli\u003eQuick attach open ended mounts- no need to slide on past anything, so there's no need to remove anything first.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA special double ended clamp attaches to an existing tube, often your handlebars, but in this case, your direct steer horizontal tube. Since the clamp is open ended, it’s easy to install, even with everything else already there. Another double ended clamp holds a T-bar for your accessories. The two clamps are joined in the middle by a third L shaped tube. The third tube in the middle lets you articulate the mount, much like your elbow allows you to move your arm in and out and swing it around. \u003c\/li\u003e\n\u003cli\u003eYou simply install the mount, move things around to where they need to be, and lock the clamps. The clamps lock tight enough you can easily pick up your bike or trike by the T bar. \u003c\/li\u003e\n\u003cli\u003eCockpit Mounts are available as kits and as individual pieces. We are starting out with two kits, one that's a Indirect Steer Horizontal Attach Kit designed for Catrikes and other Direct steered trikes. In individual parts, there are two types of clamps, two types of articulation tubes, and a T bar that’s asymmetric to maximize positioning options. We will be introducing additional clamps and other system parts in the coming months. The idea is to create a versatile, mix and match system for attaching whatever you need, wherever you need.\u003c\/li\u003e\n\u003cli\u003eThis Cockpit Mount Kit is designed to attach to a 7\/8in Vertical Tube (22.2mm) tube (the diameter of your handlebars where the controls attach). The mounting clamp is 1\/2in (12.7mm) thick, so all that's required is 1\/2in of reasonably straight tube to clamp to. Because of the strength of the clamps, we don't recommend clamping to Carbon Fiber tubes. Other than that, if you have 1\/2in of clear space on a 7\/8in tube that's either straight or not curving very much, you can attach this mount. In most underseat steering applications, you'll attach it just below where the brake lever clamps on. \u003c\/li\u003e\n\u003cli\u003eThe double ended clamps hold the centers of the tubes 2in (50.8mm) apart. With the two clamps in this kit joined by a central pivot tube, the T Bar where your accessories will go can be anywhere in the range about 0 to almost 4 inches (101.6mm) away from the tube you clamp to. The T Bar is 5in (125mm) wide and 9 in (225mm) tall. It's asymmetric so you can point it inboard or outboard. The link\/pivot tube is 1.5in (40mm) tall. You are free to mix and match and rearrange the clamps, pivot tube, and T Bar to get the perfect location for your accessories. \u003c\/li\u003e\n\u003cli\u003eBy putting the right amount of tension on the clamps, you'll find it's very easy to move things around and find the ideal position for everything. Once you've determined your ideal position, just tighten the clamps to lock everything in place. \u003c\/li\u003e\n\u003cli\u003eThe T Bar is 7\/8in diameter, so anything that's made to attach to a handlebar will be happy there. To attach a mirror inside the T Bar, simply remove one end cap and install the mirror as if it were on the end of a regular handlebar.\u003c\/li\u003e\n\u003cli\u003eWeight: 7oz\u003c\/li\u003e\n\u003cli\u003eThis vertically attaching version of the Cockpit Mount system is usually used with underseat steered recumbent bikes and trikes, but there are lots of other places it will work. We make a different version for attaching to horizontally oriented tubes, intended for the horizontal portions of direct steered recumbent trikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"display: inline !important;\" id=\"productGeneral\"\u003e\u003cform action=\"http:\/\/t-cycle.com\/accessory-mounting-c-71\/accessory-mounts-c-71_73\/cockpit-mountvertical-attachment-p-39.html?action=add_product\u0026amp;number_of_uploads=0\" style=\"display: inline !important;\" enctype=\"multipart\/form-data\" method=\"post\" name=\"cart_quantity\"\u003e\n\u003cdiv style=\"display: inline !important;\"\u003e\n\u003cdiv style=\"display: inline !important;\" title=\"\"\u003e\n\u003cdiv style=\"display: inline !important;\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"7\/8in","offer_id":49313964982516,"sku":"ACM039.1","price":120.0,"currency_code":"USD","in_stock":true},{"title":"1in","offer_id":49313965015284,"sku":"ACM039.2","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/ACM039_3800933d-4043-486b-bd05-a9f16ddc0d1f.jpg?v=1788458186"},{"product_id":"handlebar-accessory-mount","title":"Handlebar Accessory Mount","description":"\u003cp\u003e This two part mount consists of a low profile clamp that attaches to your handlebars and an accessory mounting tube that attaches to the clamp, allowing you to easily attach GPS, phone, or mirror! The clamp can go almost anywhere- all it needs is 1\/2 inch (12mm) of straight handlebar and you can fit it in. The accessory mounting tube can be all sorts of things. Our standard options are a straight tube 4 inches (101mm) long or a 90 degree L that measures 1.75 inches (45mm) along the inside of the legs. Both are 7\/8 (22.2mm) diameter and hollow, so standard handlebar accessories can fit on the outside, and things like mirrors can fit on the inside.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/qxILKRxsP_I\" height=\"480\" width=\"854\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. Why this new mount?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eWe found that a lot of trikers would like to mount accessories right below their hands. There often isn't much room on the handlebar to attach a mount, but there is usually at least a little bit of room between the grip and the brake, or right below the brake. We designed a new low profile clamp that only requires half an inch (about 12.7mm) of room. If you don't have that much room already, you can usually create it pretty easily. In order to maximize the versatility, we made the clamp so that it also clamps the accessory mounting tube from the inside. This means all sorts of tubular things can be attached, from ordinary straight tubes to bent or welded shapes. There are all sorts of possibilities. You are not limited to a mount with a particular shape or length, you can easily make things exactly the way you want them.\u003c\/p\u003e\n\u003cp\u003e2. What can I put on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAll sorts of things! Mirrors, armrests, phones, GPSs, and more!\u003c\/p\u003e\n\u003cp\u003e3. Can I use it to make my own bar end?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, no. The clamp is designed to be small and light and it's not strong enough to be a true bar end that you'd use for steering.\u003c\/p\u003e\n\u003cp\u003e4. Can I put other tubes on it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes! Any ordinary 7\/8 inch (22.2mm) handlebar tubing will fit. We make a number of straight, bent, and welded tube things that are all compatible (See our Cockpit Mounts, SeatSide Mounts, and Fairing Mounts, for example).\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003cp\u003eThe inside wedge clamp is operated by a 6mm bolt accessed from under the arch of the outside clamp. To operate the inside clamp, remove one of the 5mm bolts holding the clamp arch. Swing the arch aside to reach the 6mm edge clamp bolt. Adjust the Accessory Mounting Tube, then tighten the 6mm bolt securely.\u003c\/p\u003e\n\u003cp\u003eTo attach to the handlebar, all you need is 1\/2 inch (12.7mm) of straight tube to clamp to. If something like the brakes or a grip is in the way, you can probably move the brake or the grip a little bit to create the needed room. Remove both 5mm bolts from the clamp arch and position the clamp on the tube. Reinstall the arch, adjust the position of the mount, and tighten the 5mm bolts evenly.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from 6061T6 aluminum, anodized black. Fasteners are stainless steel. Clamp basically attaches two 7\/8 tubes together, one from the outside, and one from the inside. The Accessory Mounting tubes provided are black powder coated 7\/8 diameter 6061T4 tube.\u003c\/li\u003e\n\u003cli\u003eThis mount system is designed to fit into small spaces on handlebars and provide places to mount accessories. It is very versatile and can be reconfigured for many other light duty purposes.\u003c\/li\u003e\n\u003cli\u003eThe outside clamp is designed to clamp around a painted or anodized 7\/8 inch (22.2mm) tube. Only 1\/2 inch (12.7mm) of open handlebar space is required.\u003c\/li\u003e\n\u003cli\u003eThe inside clamp is designed to clamp to the inside of a 7\/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7\/8 tubing for bikes and trikes is in this range.\u003c\/li\u003e\n\u003cli\u003eThis clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.\u003c\/li\u003e\n\u003cli\u003eFits any bike or trike with 1\/2 inch (12.7mm) of straight space on the handlebar where you'd like to mount other things.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"4in (101mm) Straight","offer_id":49313965179124,"sku":"ACM337.1","price":72.0,"currency_code":"USD","in_stock":true},{"title":"1.75in (45mm) Elbow","offer_id":49313965211892,"sku":"ACM337.2","price":102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/straight_4.jpg?v=1788458188"},{"product_id":"tab-mount-euro-style","title":"Tab Mount For Euro Style Lights","description":"\u003cp\u003eThe Tab Mount For Euro Style Lights connects onto your Accessory Mount to provide the tab-type mount needed for many European cycle lights. The super-sturdy construction means you don't have to worry about fatiguing or breaking. The tab is able to move independently of the Accessory Mount to adjust the angle of your light just how you want it. Note that what is included here is only the add on tab for European lights, not the entire Accessory Mount.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1.  What does this do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThis tab attaches to the side of your Accessory Mount and creates a place to attach a Euro style tab mounted light.\u003c\/p\u003e\n\u003cp\u003e2. Can I use it other places?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, it can be used other places. We make it to fit perfectly to our Accessory Mount, but it can be used other places. It works with our Long Wheelbase Accessory Mount as well, for instance.\u003c\/p\u003e\n\u003cp\u003e3. What is included?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eThe tab and a longer bolt to replace the existing bolt in your Accessory Mount.\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe Euro Tab Mount can be added to the Accessory Mount for Long Wheelbases, and it's also possible to put one on both sides of your Multi-Purpose Accessory Mount, depending on the width of the lights and how you swivel the tabs. If you want to put one on each side of an Accessory Mount, please let us know and we'll include a longer bolt for the short bolt side (12mm instead of 8mm).\u003c\/li\u003e\n\u003cli\u003eMade from 6061T6 aluminum, 1\/8 inch thick. 5.1mm diameter holes. Center to center distance between the holes is 25mm.\u003c\/li\u003e\n\u003cli\u003eDisassemble your Accessory Mount, add the tab onto the end, and reassemble with the longer bolt. Install and adjust as usual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"Default Title","offer_id":49313965244660,"sku":"ACA033.1","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/ACA033.jpg?v=1788458188"},{"product_id":"vertical-rear-light-mount","title":"Vertical Rear Light Mount","description":"\u003cp\u003eFinally! A good way to mount vertically oriented rear lights on the backs of recumbents! Rear lights are important for safety. Recumbents often don't have good places to mount them, especially if the light was designed to go on a vertical tube like an upright bike seat tube. How do you create a vertically oriented tube on the back of a recumbent? With this! This mount attaches to almost any tube in almost any orientation, and allows you to create a vertically oriented tube sticking up from it. The locking swiveling clamp system is super simple and holds really well. Simply snap the clamp over the tube you want to attach to, swivel things around until they are lined up the way you like, and tighten the bolt. Attach your light and away you go!\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e1. What does this do?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIt attaches all sorts of places on oddly angled tubes and creates a nicely vertical or horizontal place to mount things like lights. It's really handy for mounting rear lights on recumbents.\u003c\/p\u003e\n\u003cp\u003e2. Where can I put it?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eAlmost anywhere. Higher is usually better with rear lights. The clamps are available to go on round tubes anywhere from 1\/4 inch up to 1-1\/4 inch. Tubes smaller than 1\/2 inch require a rubber shim; the rubber shims are 1\" outside diameter. So- things like rear rack rods are now available for attaching lights!\u003c\/p\u003e\n\u003cp\u003e3. Will it hold my light?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eIf your light is any normal sort of bike light, yes. Anything of a reasonable size and weight will work.\u003c\/p\u003e\n\u003cp\u003e4. Really? That simple?\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eYes, really.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION INSTRUCTIONS\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eDecide where you'd like to attach a light. Tubes at any angle are OK, as long as they are between 1\/4 inch (6mm) and 101\/4 inch (31.8mm). So things like horizontal tubes across the back of the seat, seatstay tubes that angle up to the back of the seat, all those are OK. Measure the tube and order the corresponding clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemove the bolt from the clamp assembly and set aside. Snap the open clamp around the tube where you want to attach things. Reinsert the bolt and start the threads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSwivel the light mounting tube around to the orientation you want. Keep in mind the light mounting tube can be positioned to the left or to the right of the tube it's attached to; if in the course of your swiveling things around, it winds up on the opposite side from where you want it, remove the clamp from the bike\/trike, rotate the clamp 180 degrees, and snap it back on. It will now swivel to the side you want.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen things are lined up the way you want, tighten the bolt. If the clamp is not tight enough, you may need to insert some of the provided grey plastic shim. Start by trying the entire shim; if that's too much, cut off 25% and try again until the fit is right.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAttach your light.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eADDITIONAL INFO\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMounts use modified Cateye brand band clamps. Cateye clamps are very strong and available in a wide range of sizes. We modify the clamps to add a special bushing to allow them to be joined back to back. Serrations on the clamps lock them to each other. Choose the size of clamp that matches the size of the tube where you want to attach. The tube where you put the light is 4 inches long and 7\/8 inches in diameter, so any bike light will fit.\u003c\/li\u003e\n\u003cli\u003eClamps available for attaching to tubes from 1\/4 inch to 1-1\/4 inch (6mm to 31.8mm). Clamps are fine tuned by adjusting the length of the provided shim. Special 1 inch OD rubber shims are provided for tubes under 1\/2 inch.\u003c\/li\u003e\n\u003cli\u003eThe tube where the light is attached is 7\/8 inch (22.2mm) OD and 4 inches (100mm) long. The tube is black powder coated aluminum.\u003c\/li\u003e\n\u003cli\u003eFits nearly any bike or trike, upright or recumbent.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003cp\u003eTypical lead time is 10–14 business days.\u003c\/p\u003e","brand":"T-Cycle","offers":[{"title":"1\/4in","offer_id":49313965310196,"sku":"ACM376.1","price":23.0,"currency_code":"USD","in_stock":true},{"title":"3\/8in","offer_id":49313965342964,"sku":"ACM376.2","price":23.0,"currency_code":"USD","in_stock":true},{"title":"1\/2in","offer_id":49313965375732,"sku":"ACM376.3","price":21.0,"currency_code":"USD","in_stock":true},{"title":"5\/8in","offer_id":49313965408500,"sku":"ACM376.4","price":21.0,"currency_code":"USD","in_stock":true},{"title":"3\/4in","offer_id":49313965441268,"sku":"ACM376.5","price":21.0,"currency_code":"USD","in_stock":true},{"title":"7\/8in","offer_id":49313965474036,"sku":"ACM376.6","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1in","offer_id":49313965506804,"sku":"ACM376.7","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/8in","offer_id":49313965539572,"sku":"ACM376.8","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4in","offer_id":49313965572340,"sku":"ACM376.9","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/files\/vertical_rear_light_mount_c3d4c4e8-81f1-441a-ba68-7b28e0842871.jpg?v=1788458189"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2634\/2644\/collections\/Cockpit_Mount-_Horizontal_3.png?v=1788455323","url":"https:\/\/falcoedrive.com\/collections\/t-cycle-accessory-mounts.oembed","provider":"Falco eMotors Inc.","version":"1.0","type":"link"}